PREPARATIONS
Connection
Plug in the AC power cord to the AC power outlet after all other connections are made.
1Connect the front speakers.
Connect the right front speaker to the SPEAKERS R terminals and place it on the right side of the unit.
En Connect the left to the SPEAKERS L terminals and place it on the left side.The speaker cords with the white stripes go to the 0terminals.
2Connect the supplied antennas.
Strip off the insulation of the FM antenna with twisting the cord.
Connect the FM antenna to the FM 75 Ω terminal with
the 
mark and the AM antenna to the AM LOOP terminals.
AM antenna
FM antenna
3Connect the AC power cord to an AC outlet. When the AC power cord is connected to an AC outlet for the first time, DEMO appears on the display.
To deactivate the DEMO, press c.
•Do not
affected by magnetism near the speakers.
Remote control
Detach the battery compartment lid at the rear of the remote control and insert two R6 (size AA) batteries with correct polarity.
•Replace the batteries with new ones when the operational distance between the remote control and main unit becomes shorter.
•Remove the batteries if the unit is not going to be used for an extended period of time.
•The remote control may not operate if it is used under intense sunlight, etc., or if its line of sight is obstructed.
4
