8Turn over the tape and press wREC/REC MUTE to start recording on side B.
•AI Edit Recording cannot be used with discs with more than 30 tracks. "TR OVER" is displayed.
•Recording cannot start from a point halfway in the tape.
Programed Edit Recording
En As you program the CD tracks to record, Programed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape.
1Insert the recording tape in DECK 2.
2Select the CD function and load disc(s).
3Press SHIFT+CD EDIT/CHECK twice on the remote control.
"PRGM" and "EDIT" are displayed and "P
4Press the numbered buttons on the remote control to enter the length of the recording tape. 10 to 99 minutes can be specified.
• f, gor MULTI JOG can also be used to specify tape length.
5Press DISC DIRECT PLAY
-To select the 20th track, press +10, +10 and 0.
-To select the 15th track, press +10 and 5.
6Repeat step 5 to select the rest of the tracks for side A.
The remaining recording time of side A is displayed. You cannot select a track with a longer playing time.
7Press SHIFT+CD EDIT/CHECK on the remote control to switch to side B and select the tracks for the side.
8Press SHIFT+CD EDIT/CHECK on the remote control to switch back to side A.
9Press wREC/REC MUTE to start recording on side A.
The tape is rewound to the beginning of side A and recording starts.
Go to the next step when recording on side A finishes.
10Press SHIFT+CD EDIT/CHECK on the remote control to switch to side B.
11Turn over the tape, and press wREC/REC MUTE to start recording on side B.
•You cannot program more than 30 tracks. "FULL" is displayed.
•You cannot program a track with a track number larger than 30.
•Recording cannot start from a point halfway in the tape.
To stop recording
Press s. Recording and CD playback stop simultaneously.
To check the program
1 Before recording, press SHIFT+CD EDIT/CHECK on the remote control to select side A or B.
2 Press f or g repeatedly. The track number and program number are displayed in succession.
To change the program of each side
Press SHIFT+ CD EDIT/CHECK on the remote control to select side A or B, and press sto clear the program for the selected side. Then, select tracks again.
To clear the edit program
Press stwice so that "EDIT" disappears from the display.
To prevent accidental erasure
Break off the plastic tab of the cassette tape with a screwdriver or other pointed tool. To record on the tape again, cover the detection slot with adhesive tape.
Side A 
Tab for side A
16
