Panasonic DMR-E80H Playing discs, Press OPEN/CLOSE to open the tray and insert a disc

Playing back

Playing discs

1	Disc tray	3 ERASE
		REC
	REC
		DVD
	HDD	? 4
		2 4, 5
1	2
		DVD, TV
3	HDD DVD
Numbered
buttons		4
:, 9
?		;
DIRECT		MENU
		3, 4, 2, 1
NAVIGATOR,
		ENTER
TOP MENU
		RETURN
		ERASE
	DUBBING
POSITION
MEMORY

[HDD] [RAM] [DVD-R] [DVD-A] [DVD-V] [VCD] [CD] [MP3]

1 Press [Í, DVD POWER] to turn the unit on.

2 Press [HDD] or [DVD] to select the playback drive.

The HDD or DVD button lights up on the unit.

≥It is not possible to playback both HDD (Hard Disk Drive) and DVD drive simultaneously.

3 If you selected the DVD drive

Press [< OPEN/CLOSE] to open the tray and insert a disc (➜ page 14).

≥Press the button again to close the tray.

≥If cartridge protection is activated (➜ page 10), play begins automatically when you close the tray. [RAM]

≥You cannot play continuously from one side of a double- sided disc to the other. Eject the disc and turn it over.

≥If you put a disc in while the HDD is selected, the DVD but- ton on the unit will flash while the unit reads the disc.

4 Press [1] (PLAY).

The unit takes some time to read the disc

before play starts. (When a menu screen	DVD-RA
appears on the television ➜ next page)	PLAY

≥Play starts from the most recently recorded program.

[HDD] [RAM] [DVD-R]

≥Play starts from the beginning of the disc.

[DVD-A] [DVD-V] [VCD] [CD] [MP3]

To stop play

Press [∫].

≥When “PLAY” flashes on the display, resume

function is active. Press [1] (PLAY) to start play	DVD-RA
from where you stopped it.	PLAY
To cancel, press [∫] until “PLAY” goes out. (The

position is also cleared when you turn the unit off or open the disc tray.)

≥The screen saver may appear when you

stop play. Press [∫] again and you can use this unit’s tuner to watch television.

To pause play

Press [;]. (Press again to restart play.)

Auto power-off

The unit switches to standby after about 6 hours in the stop mode. You can turn this feature off or change the time to 2 hours (➜ page 44, Set Up—Off Timer).

[Note]

≥If you select another drive while playback is in progress, playback will be stopped. If using DVD-Video, the contents of the menu screen may be returned to their initial state.

≥If a disc is loaded, the unit will come on and play will start when you press [1] (PLAY).

≥When you play a disc with an audio-only track, the video from the previous disc may continue to be shown on the television.

≥Actual sound levels for DVD-Video are lower compared to televi- sion broadcast or playback of other discs. To avoid a sudden increase in volume level when switching from DVD-Video, reduce the volume setting before playing other sources or switching to television broadcast.

≥When using this unit for the first time, the HDD has nothing recorded on it. You must record a program etc to the HDD before you can enjoy playback.

18

RQT6984