JVC LYT0868-001B, 1001MKV*UN*SN Recording Playback, Shooting while using the viewfinder Make sure

RECORDING				PLAYBACK
Set REC MODE, S-VHS (S-VHS ET), TAPE				1 Load a tape ( pg. 8, “Loading/Unloading A
LENGTH and DATE/TIME in SYSTEM MENU.			Cassette”).
( pg. 18 – 21, “MENU SETTINGS”)				2 Set the Power Switch @to “		”. To start
1 Remove the lens cap. Set the Power Switch @			playback, press 4/6 ^or T.
to “ ” or “ ”.				To stop playback temporarily (Still Playback), press
				4/6 ^or s. To stop playback, press 5			$. Press
Shooting while using the viewfinder: Make sure
the LCD monitor* is closed and locked.				2 %to rewind, or 3 &to fast-forward the tape.
Shooting while using the LCD monitor*: Make			High-speed picture search (Shuttle Search) is
			possible by pressing 2 %or 3 &during
sure the LCD monitor* is fully open.
The camcorder enters the Record-Standby mode			playback (holding 2 %or 3 &down during
and “PAUSE” )is displayed.			playback continues search until released). o
• If you tilt the LCD monitor* upward to 180			resume normal playback, press 4/6 ^or T.
degrees, the viewfinder switches back on and the			For VIDEO RECORDING/VIDEO PLAYBACK
monitored image can be viewed both on the LCD
			• The camcorder shuts off automatically after about
monitor* and in the viewfinder, so the person you
				5 minutes in the Record-Standby or Stop mode.
shoot can view himself/herself.
				To turn on again, set the Power Switch @to
	!	7		“OFF”, then to “ ”, “ ” or “		”.
2 Press the Recording Start/Stop Button .			• When the Power Switch @is set to “				”, “ ” or
appears while recording is in progress.
• To stop recording, press the Recording Start/Stop				“	” and the LCD monitor* is opened at an
!	. The camcorder re-enters the Record-			angle of 60 degrees or more, the LCD monitor*
Button				switches on and the viewfinder switches off
Standby mode.
To Adjust The Brightness Of The LCD Monitor*,				automatically to save power.
			• The playback picture can be viewed in the
rotate the BRIGHT Wheel 1until the bright level
				viewfinder (with the LCD monitor* shut), on the
indiator #on the display moves and the				LCD monitor* or on a connected TV ( pg. 15,
appropriate brightness is reached.				“Connections To A TV/VCR”).
* Applicable models only.			• To remove the indications, pg. 21, DISPLAY or

OSD OUTPUT in SYSTEM MENU.

• To control the speaker volume*, slide VOL. 3 towards “+” to turn up, or towards “–” to turn down. While shooting, sound is not heard from the speaker*.

• If TBC (
pg. 14) is engaged during Still Playback, noise bars will not appear (GR-SXM78EA/SXM48EA/SXM780A/SXM480A/ SXM280A only).

* Applicable models only.

11