Connections To A TV/VCR
1)Make sure all units are turned off.
2)Connect the camcorder to a TV or VCR. If using both TV and VCR, connect the VCR output to the TV input.
3)Turn on all units. Set the VCR to its AUX input
mode, and set the TV to its VIDEO mode.
•Use the AC Adapter as the power supply.
•The
•Be sure to adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.
•If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.
Tape Dubbing
1)Connect the camcorder and the VCR
( “Connections To A TV/VCR”). Set the Power
Switch @to “ 
”, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR. Engage the VCR’s AUX and
2)Press 4/6 to find a spot just before the edit- in point. Once it is reached, press 4/6 ^again.
3)Press 4/6 ^and engage the VCR’s Record mode.
4)Engage the VCR’s
press 4/6 ^.
•Repeat steps 2) through 4) for additional editing, then stop the VCR and camcorder when finished.
To
Output 5
Connector cover
White to |
Audio |
Output 6 |
Yellow to |
Video Output 7 |
A/V cable |
To
TV |
VCR
To TV or VCR |
White to |
Audio Input |
Yellow to Video Input
15