To set audio playback
1.After performing step 10 (¼P18), press [e, r] to select “Audio Playback” and press [OK].
2.Press [e, r] to select “Audio Playback” and press [w, q] to select “On”.
•If you select “Off”, proceed to the below step 7.
3.Press [e, r] to select “Playback Time” and press [w, q] to select the playback time.
10 minutes/30 minutes/1 hour/2 hours/3 hours/No Limit
•If the audio playback time is set longer than the length of time from timer start time to timer end time, the timer end time takes priority.
4.Press [e, r] to select “Update Source/Volume” and press [OK].
5.Press [4 IN/VOL], [3 OUT/VOL] to adjust the volume.
(You can also press [VOLUME 4]/[VOLUME 3] on the main unit.)
•Press [iPod/q/h] and you can play audio and confirm the volume.
Update Timer 1 Sound Source/Volume
Source : iPod
Volume : 3
Do you want to update this setting?
YesNo
You can play the audio source in this screen to check the volume.
Select Item | OK |
6.Press [w, q] to select “Yes” and press [OK].
7.Press [e, r] to select “Confirm” and press [OK].
8.Perform the steps 11 and 12 (¼P18).
To disable the set timer
1.Select “Disable This Timer” in step 6 (¼P18) and press [OK].
2.Press [e, r] to select “Confirm” and press [OK].
To delete the timer setting
1.Select “Initialize This Timer” in step 6 (¼P18) and press [OK].
2.Press [e, r] to select “Confirm” and press [OK].
When the timer is set
• When the unit is off, the unit is automatically turned on at
the timer start time, and the timer playback starts. |
|
| ||
• At the timer end time, the unit is automatically turned off. |
|
| ||
• If the audio playback is “On”, “z” is displayed on the |
|
| ||
bottom right of the screen one minute before the timer |
|
| ||
start time. (Only for “iPod Display” screen when the unit is |
| Operations | ||
on) |
| |||
|
| |||
At the timer start time, the sound is faded in to the set |
|
| ||
volume (gradually increased) and audio is played back. |
|
| ||
“z” blinks during audio playback. (Only for “iPod Display” |
|
| ||
screen) |
|
| ||
|
|
|
| |
|
|
| ||
Note |
|
|
| |
• The timer less than 10 minutes is displayed with |
|
| ||
10 |
|
| ||
timer | ||||
• The timer operates at the set time unless you set it to | ||||
disable. | ||||
|
| |||
• The setting status such as the playback mode is reflected | the | |||
in audio playback. | ||||
• The timer audio playback does not start when the menu | Using | |||
screen is being displayed and when audio selection screen | ||||
|
| |||
is being displayed. | / | |||
• The timer does not start even at the timer start time if the | ||||
settings | ||||
the iPod/iPhone is being played or searched. | ||||
audio selector selecting “Audio Playback” and the audio |
|
| ||
selector selected at the timer start time are the same and if |
|
| ||
|
| Audio playback | ||
VQT2Z87
19