OPTIMA 1438m
Setup Menu
Set your camera’s operating environment.
1.Slide the mode switch to [ 
] or [
] or press the 
button.
2.Press the 
button, and select the [Setup] menu with the f button.
3.Select the desired option item with the c / d buttons, and press the 
button to enter its respective menu.
4.Select the desired setting with the c / d buttons, and press the 
button.
5.To exit the menu, press the 
button.
Date/Time
Refer to the section in this manual titled “Setting the Date and Time” for further details.
Language
Refer to the section in this manual titled “Choosing the Language” for further details.
Auto Off
If no operation is performed for a specific period of time, the power to the camera is automatically turned off. This feature is useful for reducing battery consumption.
* 1 Min. / 2 Min. / 3 Min. / Off
Beep
This sets whether or not to mute the camera sound each time you press the camera's buttons.
* On / Off
Display
This sets the image information display state. * Default / All / Off
Video Out
This sets your camera to match the system of the equipment that you are going to connect to the camera.
* PAL / NTSC