Connecting | 1 Using with your PC (Continued) |
devices | |
with other |
|
Connecting | 2 Printing |
devices | |
with other |
|
Folder and file names on computer
You can save images to use on your computer by dragging and dropping folders and files into separate folders on your computer.
You can connect directly to a PictBridge- compatible printer for printing.
1 Turn on power of both camera and printer
Set REC/PLAY switch to
Windows
Drives are displayed in ‘My Computer’ folder.
Macintosh
Drives are displayed on the desktop. (Displayed as ‘LUMIX’, ‘NO_NAME’, or ‘Untitled’.)
DCIM (Still/motion pictures)
P1000001.JPG
P1000999.JPG | JPG: |
Still pictures | |
MOV: | |
: | Motion pictures |
|
MISC (DPOF files)
PRIVATE1 (clipboard pictures) | |
MEMO0001.JPG | memory |
•Connect the camera to the AC adaptor
• Card:Insert card.
(Copy clipboard pictures to the card. (P.65))
•Adjust settings on your printer (print quality, etc.) as required.
•Set mode dial to any exceptor.
Hold here
(Push until fully inserted.)
• Do not disconnect the USB connection
2
3 Connect camera to printer
4 Select ‘PictBridge (PTP)’ on the camera
USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
SELECT SET
New folders are created in the following cases:
•When pictures are taken to folders containing files numbered 999.
•When using cards already containing the same folder number (including pictures taken with other cameras, etc.)
•When recording after performing ‘NO. RESET’ (P.25)
•File may not be able to be played back on camera after changing file name.
•If mode dial is set to ,
•When using Mac OS X ver.10.2 or earlier, set
If using Windows XP, Windows Vista, or Mac OS X
cable when the cable disconnection icon is displayed (may not be displayed with some printers).
Check socket direction and insert straight in. (Damage to socket can lead to faulty operation.)
When ‘CONNECTING TO PC…’ is displayed, cancel the connection and set ‘USB MODE’ to either ‘SELECT ON CONNECTION’ or ‘PictBridge(PTP)’ (P.26).
5 Select picture to print with ◄► and set
6 Select ‘PRINT START’
OFF
1
CANCEL SELECT SET
The camera can be connected to your computer even if ‘USB MODE’ (P.26) is set to ‘PictBridge (PTP)’.
•Only picture reading operations can be performed via the camera (picture deletion also possible with Windows Vista).
•It may not be possible to read if there are 1000 or more pictures on the card.
To play motion pictures on your computer
Use the ‘QuickTime’ software on the supplied
• Installed as standard on Macintosh
Save motion pictures to your computer before viewing.
USB connection cable | (Print settings → P.85) |
(always use cable |
|
supplied) |
|
If using AC adaptor, turn off camera power before plugging in or removing.
To cancel print Press ‘MENU/SET’
Do not use any other USB connection cables except the supplied one.
Disconnect USB connection cable after printing.
Turn off power before inserting or removing memory cards.
When the battery begins to run out during communication, the status indicator flashes and a warning beep sounds. Cancel printing and disconnect USB connection cable (recharge the battery before reconnecting).
Setting the ‘USB MODE’ (P.26) to ‘PictBridge (PTP)’ eliminates the need to make the settings each time the camera is connected to the printer.
82 VQT1U22 | VQT1U22 83 |