Panasonic AK-HC910 manual Maintenance menu, Black shading correction menu

Page 4

Setting of Menu Items

!Maintenance menu

MAINTENANCE￿

￿° °

1.￿BLACK SHADING￿ 2.PED,GAMMA,FLARE￿ 3.KNEE,WHITE CLIP￿ 4.R/B GAIN￿ 5.DTL￿ 6.GAIN,AUTO IRIS￿ 7.S.GAIN 1￿ 8.S.GAIN 2￿ 9.S.GAIN 3￿

10.MATRIX￿

11.COLOR CORRECTION1￿ 12.COLOR CORRECTION2

°BLACK￿ SHADING°￿

DETECTION￿

CORRECT(DIG) :ON￿

CORRECT(ANA) :ON

Move the cursor (arrow mark) to the item to be adjusted and press the MENU key, then it enters the adjustment menu thereunder.

Move the cursor to MAINTENANCE and press the MENU key, then it returns to

USER MENU.

1 Black shading correction menu

When MENU key is pressed at DETECTION, (BLK-SHD:ACTIVE) appears, then the lens is automatically stopped down and ABB operation is executed.

When CORRECT (DIG) is turned ON, horizontal and vertical shading correction is automatically executed. When it is turned OFF, the current value is maintained.

Move the cursor to “BLACK SHADING” and press the MENU key, then it returns to MAINTENANCE MENU.

When CORRECT (ANA) is set to ON, vertical shading correction (SAW tooth) is automatically corrected.

Note:

It takes about 90 sec. until completion of black shading correction.

20

Image 4
Contents Panasonic Broadcast AK-HC910 Menu Information Setting of Menu Items Configuration of menu display screenUser menu Initial screen Menu operation is executed by the HD Controller AK-HRP900Maintenance menu Black shading correction menuPedestal, gamma, flare adjustment menu Knee Slope R, B knee slope adjustment Knee&white clip adjustment menuKnee Point R, B knee point Gain adjustment menu Detail adjustment menuDetail adjustment menu from previous Master gain, auto iris setting menuSuper gain, Detail, Pedestal-offset level setting menu Color correction 1 menu QZ Color correction 2 menu@ Setting menu Menu for various settingsColor Correction Setting of matrix ON/OFF Camera mode setting menu from previousElectronic shutter setting menu $ File managing and renewing menu # Camera ID setting menuFile operation menu File operation menu from previous Save in USER1. OK?