Panasonic DMC-FP8 Setting Date/Time Clock Set, Turn the camera on, Press MENU/SET to set

Preparation

Setting Date/Time (Clock Set)

•The clock is not set when the camera is shipped.

Turn the camera on.

• The [PLEASE SET THE CLOCK] message appears.
(This message does not appear in [PLAYBACK]	OFF	ON
Mode.)
A [MENU/SET] button
B Cursor buttons

Press [MENU/SET].

Press 2/1 to select the items (year, month, day, hour, minute, display sequence or time display format), and press 3/4 to set.

‚: Cancel without setting the clock.

Press [MENU/SET] to set.

•After completing the clock settings, turn the camera off. Then turn the camera back on, switch to Recording Mode, and check that the display reflects the settings that were performed.

•When [MENU/SET] has been pressed to complete the settings without the clock having been set, set the clock correctly by following the “Changing the clock setting” procedure below.

Changing the clock setting

Select [CLOCK SET] in the [REC] or [SETUP] menu, and press 1.

•It can be changed in steps 3 and 4 to set the clock.

•The clock setting is maintained for 3 months using the built-in clock battery even without the battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)

(ENG) VQT2G37 13