Panasonic DMC-FP8 operating instructions About the battery charger, Battery charger

Page 4

CAUTION

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

Do not heat or expose to flame.

Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed.

Warning

Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC (140 oF) or incinerate.

About the battery charger

CAUTION!

DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.

Battery charger

This battery charger operates on AC between 110 V and 240 V.

But

In the U.S.A. and Canada, the battery charger must be connected to a 120 V AC power supply only.

When connecting to an AC supply outside of the U.S.A. or Canada, use a plug adaptor to suit the AC outlet configuration.

Cautions for Use

Do not use any other AV cables except the supplied one.

Do not use any other cables except a genuine Panasonic component cable (DMW-HDC2; optional).

Do not use any other USB connection cables except the supplied one.

Keep the camera as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.).

If you use the camera on top of or near a TV, the pictures and sound on the camera may be disrupted by electromagnetic wave radiation.

Do not use the camera near cell phones because doing so may result in noise adversely affecting the pictures and sound.

Recorded data may be damaged, or pictures may be distorted, by strong magnetic fields created by speakers or large motors.

Electromagnetic wave radiation generated by microprocessors may adversely affect the camera, disturbing the pictures and sound.

If the camera is adversely affected by electromagnetic equipment and stops functioning properly, turn the camera off and remove the battery or disconnect AC adaptor (DMW-AC5PP; optional). Then reinsert the battery or reconnect AC adaptor and turn the camera on.

Do not use the camera near radio transmitters or high-voltage lines.

If you record near radio transmitters or high-voltage lines, the recorded pictures and sound may be adversely affected.

4 VQT2G37 (ENG)

Image 4
Contents Basic Operating Instructions Dear Customer Information for Your SafetyCarefully observe copyright laws FCC Note About the battery packDeclaration of Conformity About the battery charger Battery chargerAbout Condensation When the lens is fogged up This symbol is only valid in the European UnionCare of the camera About cards that can be used in this unitContents Standard Accessories Indicated as battery charger or charger in the textNames of the Components PressHand strap eyelet Card/Battery door Release leverTripod receptacle Charging the Battery Detach the battery after charging is completedBattery life Recording conditions by Cipa standardInserting and Removing the Card optional/the Battery Do not touch the connection terminals of the cardSetting Date/Time Clock Set Changing the clock settingSelect Clock SET in the REC or Setup menu, and press Turn the camera onSetting the Menu Setting menu itemsPress 3/4 to select AF Mode Press Press 4 to select the Setup menu iconPress Selecting the REC Mode Taking pictures using the automatic function Slide the REC/PLAYBACK selector switch to !. Press aREC Mode ñ Press the shutter button halfway to focusScene detection AF Tracking FunctionTaking pictures with your favorite settings FocusingREC Mode · Press 3/4 to select Normal PICTURE, and then press MENU/SETPlaying back Pictures Normal Play Slide the REC/PLAYBACK selector switch a toPress 2/1 to select the picture Deleting Pictures To delete a single pictureSelect the picture to be deleted, and then press ‚ Press 2 to select YES and then press MENU/SETFor Windows Example When an English language OSFor Macintosh Specifications Metering mode ISO sensitivity Standard Output SensitivityShutter speed White balanceDimensions MassweightBattery Pack Lithium-ion Panasonic Interface DigitalDigital Camera Accessory System Accessory# Illustration DescriptionDigital Camera Accessory Order Form VisaReason for requesting service Request for Service NoticeLimited Warranty Coverage Limited WarrantyOne Panasonic Way, Secaucus, New Jersey Carry-In or Mail-In Service Customer Services Directory Accessory Purchases United States and Puerto Rico
Related manuals
Manual 28 pages 23.09 Kb