Replacing the remote control battery

1. While keeping the battery holder release lever pressed as the arrow 1 on the remote control unit indicates to release the lock, pull out the battery holder from the remote control unit 2.

2. Replace the battery.

Use one 3 V lithium (CR2025) battery.

Insert the battery with + polarity side facing up into the battery holder.

3. Insert the battery holder into the remote control unit until it clicks closed.

Warning:

Keep the batteries out of the reach of children. If a battery is swallowed, consult a doctor immediately.

40Advanced Operations

Page 40
Image 40
Nikon 140ED instruction manual Replacing the remote control battery, Replace the battery