Nikon 140ED Characteristic of electronic cameras, Problem Check points and solution

	Problem	Check points and solution	Ref. page
		a Camera shake.
		→Gently press the Shutter Release button, or use a	18,19
		tripod or place the camera on a stable flat surface.	33,35
Focus	The subject	a Something in front or in back of the subject is in
	appears out of	focus.
	focus in the print.	→Be sure to center the autofocus frame mark on	22,26
		the subject before releasing the shutter. When	27
		correct focus cannot be easily achieved, use
		the focus lock.
	No indicator	a The battery is installed with wrong polarities.
	appears even	→Install it with the correct polarities.*	12
LCD	when the camera	a No battery or dead battery.
	is turned on.	→Install a new battery.*	12,13
panel
	The numeral “ ”	a The letter “ ” blinks or lights up.
	does not appear	→Remove the film and load it again.	14,15
	even when film is
	loaded.
		a You are out of the remote control working range.
Remote	The shutter	→Operate the remote control in a range within	39
		a Two or more minutes have elapsed since you set
		5m facing the camera.
control	cannot be	the camera to the Remote Control mode.	39
		again.
	released using	→Set the camera to the Remote Control mode
(optional)	the remote	a The remote control is operated in backlit.
	control.
		→Change the position of the remote control.	39
		a The service life of the battery in the remote
		control has lapsed (5 years).
		→Install a new battery.	40

*When the battery is replaced or re-installed, the date and time you set are cleared.

Reset them. ( p. 41)

E

A characteristic of electronic cameras

In rare cases, when strong static electricity or the like is applied to the camera, the camera may not work properly.

If this happens, remove the battery and re-install it.

When the battery is removed, the date/time you set are cleared.

Reset them after reinstalling the battery. ( p. 41)

Additional Information 43