Turning the camera on

Open the slide cover.

Once you open the cover in the direction of the arrow, the camera is turned on, the built-in flash automatically pops up, and the lens extends out to the wide-angle position.

Slide the cover until it clicks.

When closing the cover, first slide it slightly in to start lens retraction. When the lens is completely retracted, slowly close the cover.

Checking the battery power

Make sure that the Low Battery Power indicator

(

) is not appeared on the LCD panel.

E

Lite Touch Zoom 140ED

Lite Touch Zoom 140ED QD

If “” is not appeared, battery power is sufficient.

If “” is blinking, or all the indicators on the LCD panel do not appear, the battery is exhausted. Replace it with a new one.

Always check the battery condition before shooting.

It is recommended to carry spare batteries with you. The batteries may be difficult to obtain in some areas.

Preparations 13

Page 13
Image 13
Nikon 140ED Turning the camera on, Checking the battery power, Open the slide cover, Is not appeared on the LCD panel