Panasonic DMC-FX12, DMC-FX10 operating instructions Iso, Sensitivity 100 1250 Use Bright

Advanced (Recording pictures)

•When you take a picture with the flash, the white balance may not be properly adjusted if the flash level is insufficient for the subject.

•The white balance setting is memorized even if the camera is turned off. However,

the white balance setting for a scene mode returns to [AWB] when the scene mode is changed.

•You can finely adjust the white balance in [UNDERWATER] in scene mode. (P51)

•The white balance cannot be set in the following cases.

-Simple mode [V]

-[SCENERY], [NIGHT PORTRAIT], [NIGHT SCENERY], [FOOD], [PARTY], [CANDLE LIGHT], [SUNSET], [STARRY SKY], [FIREWORKS], [BEACH], [SNOW], [AERIAL PHOTO], [UNDERWATER] in scene mode

Press [_] to display the [REC] mode menu and select the item to set. (P17)

ISO is a measure of sensitivity to light. The higher the sensitivity is set, the less light is needed to take a picture so the camera becomes more suitable for recording in dark places.

•When setting to [AUTO], the ISO sensitivity is automatically adjusted to a maximum of [ISO400] according to the brightness. (It can be adjusted to a maximum of [ISO640] when using the flash.)

60

•ISO sensitivity is fixed to [ISO3200] in [HIGH SENS.] (P49) in scene mode.

•To avoid picture noise, we recommend decreasing the highest ISO sensitivity or setting [COLMODE] to [NATURAL]. (P64)

•The ISO sensitivity is set to [ISO LIMIT] in intelligent ISO sensitivity mode [ [_ ]. (P42)

•ISO sensitivity cannot be set in the following cases.

-Simple mode [V]

-Motion picture mode [_] - Scene mode

Press [ _] to display the [REC] mode menu and select the item to set. (P17) By changing the aspect ratio, you can select an angle of view that matches the subject.

Select to take pictures with the

same aspect ratio as a 4:3 TV or a PC monitor.

m