Connecting to other equipment
•The drive is displayed as [NO NAME] or
[Untitled] when you connect the camera with a card inserted.
•About motion picture playback on a PC Use the software "QuickTime"
(for Windows 2000/XP) in the
(supplied) to play back motion pictures recorded on this camera on a PC.
•If you use "Windows 98/98SE/Me", download "QuickTime 6.5.2 for PC" from
the following site, and install it. http://www.apple.com/suppor t/q uicktime/
•This software is installed as standard on a "Macintosh OS".
•Folder Composition
Folders are displayed as shown in the following illustration.
OFolder number File number
_) JPG: pictures
MOV: motion pictures
MlSC: Folder containing files on which the DPOF print settings are recorded
•The data for up to 999 pictures recorded by the camera can be included in 1 folder.
If the number of pictures exceeds 999, another folder is created.
•To reset the file number or the folder number, select [NO.RESET] in the [SETUP] menu. (P20)
82
•Conditions under which a different folder number is used
In the following cases, the picture is not recorded in the same folder as the
previously recorded picture. It is recorded in a folder with a new number.
1When the folder just recorded to contains a picture file with the number 999 in it (example: P1000999.JPG).
2When the card just recorded to contains, for example, a folder with the number 100 [100 PANA] in it and that card is
removed and replaced with a card that has a folder with the number 100 in it
recorded by a camera from a different maker (100XXXXX, with XXXXX being
the name of the maker) and then a picture is recorded.
3When recording after selecting [NO.RESET] (P20) from the [SETUP] menu. (Pictures will be recorded to a new folder with a number sequential to the folder recorded to immediately before. By using [NO.RESET] on a card that does not contain folders or pictures, such as one just formatted, the folder number can be reset to 100.)
• About the PTP conection
If the OS is "Windows XP" or "Mac OS X', you can connect in PTP mode if you set this unit to [1_] mode and then connect to your PC.
•Pictures can only be read on the camera.
They cannot be written to a card or deleted.
•When there are 1000 or more pictures on a card, the pictures may not be imported.
•Do not use any other USB connection cables except the supplied one.
•Do not disconnect the USB connection cable while [ACCESS] is displayed.
•If there are a lot of pictures on the
VQT1014