Operating Instructions
| Instructions for the data fields |
|
|
Camera Type | Select the Network Camera type (with Pan/Tilt feature, without Pan/ |
| Tilt feature or with zooming feature). |
|
|
IP address | Enter the IP address of Network Camera. |
| Enter "IP address (or domain name):Port number". |
| (When port number is 80 [default], you do not need to enter port |
| number.) |
| • Enter the alphanumeric characters. |
|
|
Camera Name | Enter Camera Name. |
| • Maximum 250 characters including a path name of a folder |
| • [\], [/], [:], [.], [;], [*], [?], ["], [<],[>] and [] are not available. |
|
|
Description | Enter the information of Network Camera. |
| • Maximum 128 characters |
|
|
Resolution | Select 640 x 480, 320 x 240 (default) or 160 x 120. |
|
|
Image Quality | Select Favor Motion, Standard (default) or Favor Clarity. |
|
|
Capture Type | Select Motion Image or Still Image. Intervals should be set over |
| 0.5 seconds. |
| • You may not monitor or record at the specified intervals |
| depending on the recording situations. |
|
|
Recording File | Select a recording file format. |
Format | • JPG creates JPEG files. The number of continuous recorded |
| |
| images are limited. MJP is recommended when recording a |
| motion image or still images at short intervals. |
| • MJP creates an MJP file. MJP puts continuous JPEG files |
| together every hour. |
|
|
Recording | Select Off, On or Motion Detect. |
|
|
Timer | Set the date of recording. Select the date and a day of the week. |
Operation | If the setting time passes over midnight, check the day of start time. |
| • Select [On] or [Motion Detect] for recording type. Images are |
| recorded when detecting motions, when selecting [Motion |
| Detect]. |
|
|
34