Panasonic DMCFX30K Press MENU/SET Press 3/4 to select ISO Limit and then press, Settings

Advanced (Recording pictures)

Changing the sensitivity according to the movement of the subject being recorded

The camera detects the movement of the subject near the center of the screen and then sets the optimal ISO sensitivity and shutter speed according to the movement and the brightness of the subject.

1 Press [MENU/SET].

2 Press 3/4 to select [ISO LIMIT] and then press 1.

REC		1/3
W.BALANCE		AWB
MAXISO ISO LIMIT		400
ASPECT RATIO		800
PICT.SIZE		1250
QUALITY		1250
SELECT	SET MENU

3 Press 3/4 to select the item and then press [MENU/SET].

Item Settings

400The ISO sensitivity

800automatically increases up to the set value according to the

1250 movement and brightness of the subject.

•The higher the value set for the ISO sensitivity, the more effectively the jitter will be reduced. However, picture noise will increase.

•Jitter is avoided when taking pictures indoors of a moving subject by increasing the ISO sensitivity and making the shutter speed faster.

F2.8

1/125 ISO800

•Noise is avoided when taking pictures indoors of a subject with no movement by decreasing the ISO sensitivity.

F2.8

1/30 ISO200

•When you press the shutter button

halfway, [ ] A appears. When you press the shutter button fully, the shutter

speed and the ISO sensitivity appear for a while.

F2.8

•The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/ 30 cm (0.98 feet) (Tele) to ¶]

•When the flash is activated, the ISO sensitivity is automatically increased to a maximum of [ISO640]. (When the highest ISO sensitivity is set to a setting other than [ISO400].)

•Refer to P36 for information about the available flash range .

41

VQT1B86