Panasonic DMC-FX30, DMCFX30K operating instructions Taking Pictures using Burst

Advanced (Recording pictures)

ISO sensitivity in intelligent ISO sensitivity mode [ ] (P41) and [SPORTS] (P45), [BABY1]/[BABY2] (P46) and [PET] (P47) in scene mode.

•The stabilizer function may not be effective in the following cases.

–When there is a lot of jitter.

–When the zoom magnification is high.

–In digital zoom range.

–When taking pictures while following a moving subject.

–When the shutter speed becomes slower to take pictures indoors or in dark

places.

Be careful of camera jitter when you press the shutter button.

•The setting is fixed to [MODE2] in simple

mode [ ] and [SELF PORTRAIT] (P44) in scene mode and fixed to [OFF] in

[STARRY SKY] (P48) in scene mode.

•In motion picture mode [ ], [MODE2] cannot be set.

64

[BURST]

Taking Pictures using Burst

Press [ MENU/SET ] to display the [REC] mode menu and select the item to set. (P57)

∫Number of pictures recorded in burst

mode
Burst speed	Number of recordable
(pictures/	pictures (pictures)
second)
3¢	max. 5	max. 7
2¢

Depends on the approx. 2 remaining capacity of the

built-in memory/card.

¢The burst speed is constant regardless

of the transfer speed of the card.

•The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated.

•The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places or if the ISO sensitivity is high.

•Hold down the shutter button fully to activate the burst mode.

•When the flash is activated, you can take only 1 picture.

•When the burst mode setting is set to Unlimited

–The burst speed becomes slower halfway. The exact timing of this depends on the type of card, the picture size and the quality.

–You can take pictures until the capacity of the built-in memory or the card is full.

•The focus is fixed when the first picture is taken.

VQT1B86