Panasonic DMC-FS8S ˜ Burst, ¢DMC-FS7, ¢DMC-FS6, Depends on, Built-in memory/card

Advanced (Recording pictures)

•Under certain picture-taking conditions including the following cases, the facial recognition function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].

–When the face is not facing the camera

–When the face is at an angle

–When the face is extremely bright or dark

–When there is little contrast on the faces

–When the facial features are hidden behind sunglasses, etc.

–When the face appears small on the screen

–When there is rapid movement

–When the subject is other than a human being

–When the camera is shaking

–When digital zoom is used

˜[BURST]

For details on [REC] mode menu settings, refer to P20. Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken.

Applicable modes: ñ·¿

		[OFF]	˜	ò
Burst speed (pictures/		—	2.3¢(DMC-FS7)	approx. 1.7 (DMC-FS7)
second)			3¢(DMC-FS6)	approx. 2 (DMC-FS6)
	A	—	max. 3 (DMC-FS7)
Number of			max. 4 (DMC-FS6)	Depends on the
recordable				remaining capacity of the
			max. 5 (DMC-FS7)
pictures	›	—		built-in memory/card.
			max. 7 (DMC-FS6)

¢The burst speed is constant regardless of the transfer speed of the card.

•The burst speed values given above apply when the shutter speed is 1/60 or faster and when the flash is not activated.

Note

•When the Burst mode setting is set to Unlimited

–The burst speed becomes slower halfway. The exact timing of this depends on the type of card, the picture size and the quality.

–You can take pictures until the capacity of the built-in memory or the card is full.

•The focus is fixed when the first picture is taken.

•When the burst speed is set to [˜], the exposure and white balance are fixed at the settings used for the first picture for the subsequent pictures as well. When the burst speed is set to [ò], they are adjusted each time you take a picture.

•When the self-timer is used, the number of recordable pictures in Burst mode is fixed to 3.

•If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors etc. where there is a large difference between the light and shade, it may take time until the exposure is stable. If burst is used at this time, the exposure may not become optimal.

•The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high etc.

•Burst mode is not canceled when the camera is switched off.

•If you take pictures in Burst mode with the built-in memory, it will take time to write the picture data.

•[Œ] is set for the flash when burst is set.

•Auto bracket is canceled when burst is set.

•Burst cannot be used in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [FILM GRAIN] or [PHOTO FRAME] in Scene mode.

64 VQT1V73