Advanced (Recording pictures)
∫Canceling Power LCD or High angle
mode
•If you press and hold [LCD MODE] again for 1 second the screen shown in step 2
is displayed. Select [OFF] to cancel Power LCD mode or High angle mode.
•High angle mode is also canceled if you turn the camera off or power save mode is activated.
•The brightness of the pictures displayed on the LCD monitor is adjusted when Power LCD mode or High angle mode is activated. Therefore, some subjects may look different on the LCD monitor. However, this does not affect the recorded pictures.
•The LCD monitor automatically returns to normal brightness after 30 seconds when recording in Power LCD mode. Press any button to make the LCD monitor bright again.
•If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or another object to block the light.
•High angle mode is not activated in the following cases.
–In simple mode [ 
]
–In playback mode
–In print mode [ 
]
–While the menu screen is displayed
–While the review screen is displayed
Taking Pictures using the Built-in Flash
A: Photo flash
Do not cover it with your fingers or other objects.
∫Switching to the appropriate flash
setting
Set the flash to match the recording.
1Press 1 [
].
2Press 3/4 to select a mode.
FLASH
|
| AUTO |
|
|
|
| |
|
| FORCED FLASH ON | |
|
| FORCED OFF | |
|
|
|
|
SELECT | SET MENU | ||
•You can also press 1 [
] to select.
•For information about flash settings that can be selected, refer to “Available flash settings by recording mode”. (P36)
3 Press [MENU/SET].
•You can also press the shutter button halfway to finish.
•The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.
: AUTO
The flash is automatically activated when the recording conditions make it necessary.
35
VQT1C14