![](/images/new-backgrounds/1248957/248957143x1.webp)
Advanced (Playback)
∫Rotate
(The picture is rotated manually.)
1 Press 2/1 to select the picture and then press 4.
ROTATE
1/3
SELECT SET
EXIT MENU
•The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].
•Motion pictures and protected pictures cannot be rotated.
2 Press 3/4 to select the direction to rotate the picture and then press [MENU/SET].
ROTATE
| MENU |
CANCEL SELECT SET MENU | SET |
The picture rotates clockwise in steps of 90°.
The picture rotates
3 Press [MENU/SET] twice to close the menu.
•If you take pictures when aiming the camera up or down, it may not be possible to display the pictures vertically. (P24)
•The picture may be slightly blurred when the camera is connected to the TV with the AV cable (supplied) and played back vertically.
•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format
72
for still pictures which allows recording information etc. to be added. It was established by “JEITA (Japan Electronics and Information Technology Industries Association)”.
•Rotated pictures are displayed rotated when they are played back in review playback and playback zoom however are displayed without being rotated when they are played back in multi playback.
•It may not be possible to rotate pictures that have been recorded with other equipment.
[DATE STAMP]
Stamping information such as the date on the recorded pictures
Press [ MENUSET ] to display the [PLAY] mode menu and select the item to set. (P69) You can stamp the date and time of recording, the age and the travel date on the recorded pictures.
It is suitable for regular size printing. (Pictures with a picture size larger than [ ] will be resized when stamping the date etc. on them.)
Press 3/4 to select [SINGLE] or [MULTI] and then press [MENU/ SET].
PLAY |
| 1/3 |
|
SLIDE SHOW |
|
| |
FAVORITE | OFF |
| |
ROTATE DISP. | ON |
| |
ROTATE | SINGLE |
| |
DATE STAMP | MULTI | MENU | |
SELECT | SET MENU |
| SET |
•The date information cannot be stamped on the following pictures.
–Pictures recorded without setting the clock
–Pictures recorded with other equipment
–Pictures that were previously stamped with [DATE STAMP]
–Motion pictures
VQT1C14