Corner Mounting
The wall brackets have an angle designed for mounting the speakers across a 90° inside corner. This is very useful within an enclosed patio area or angling the speakers into a room, fig. 3.
Optional Omni Mount (not included)
The top of each speaker cabinet has a pair of inset screws designed for use with the Omni Mount 20.5 ball mount. This is useful for mounting the speakers vertically rather than horizontally. The mount consists of two pieces. One that screws to the speaker enclosure and one that is mounted on the wall. The wall mount has a
Making the Connection
Positive and negative spring loaded connection terminals are located on the back of each speaker. Note that the stereo speakers have two pairs of terminals to accept both left and right signals. The terminals are color coded red for the positive signal and black for the negative signal, fig 5. For this purpose, many pairs of speaker wires utilize red and black shielding for easily identifying the positive and negative leads. Other speaker wires use a copper wire for positive and white tinted copper wire for negative.
Once the installation is complete, your speakers should be fully operational. Should you have no audio from the speakers, make sure the speaker wires did not become disconnected from the terminal posts, or that there is not a short in the speaker wire.
Fig. 3
Fig. 4
Fig. 5
Resonate
Model:
Serial:
BreatheAudio Technologies LLC Hebron, Kentucky USA
www.breatheaudio.com
Made in China
- Signal | + Signal |
2