Panasonic DMC-FZ2A operating instructions Troubleshooting

Page 100

Others

Troubleshooting

1:The power does not turn on. 1-1: Are the battery and the AC

adaptor correctly connected? Check the connection.

1-2: Is the battery sufficiently charged? Use a battery that has been sufficiently charged.

2:As the power is turned on, it turns off immediately.

2:Is the battery charge insufficient to operate the camera? Charge the battery or replace it with charged one.

3:The lens and the Viewfinder are

fogged.

3:Has condensation occurred? Carrying the digital camera from a cold place to a warm place could cause condensation on the camera. Wait until condensation disappears.

4:The image cannot be recorded. 4-1: Is the Memory Card inside?

4-2: Is the mode dial correctly set ? Check it.

4-3: There is no memory capacity left on the card. Before recording, delete some images.

5:The image is not displayed on the LCD monitor.

5:Is the the image displayed on the Viewfinder? Press the [DISPLAY] button to switch to LCD monitor display.

6:The LCD monitor/Viewfinder is

too bright or dark.

6:Adjust the brightness of the LCD monitor/Viewfinder.

7:Flash does not fire.

7:Is the flash closed? Press the

[ OPEN] button to open the flash.

8:The display or images on the LCD monitor/Viewfinder are not focused.

8:Set the mode dial to the mode corresponding to the distance to the subject.

9:The image cannot playback. 9-1: Is the Card inside?

9-2: There is no image in the Card.

9-3: The mode dial is not set to playback [ ].

100

Page 99 Page 101
Image 100
Page 99 Page 101
Contents Operating Instructions Information for Your Safety Dear CustomerContents Others Standard Accessories Names of the Components Front ViewUp View Back ViewBattery Charger/AC Adaptor Left ViewRight View Bottom ViewLCD Monitor Display/Viewfinder Display RecordingRecording in Simple mode Playback InternetQuick Guide Charge the battery # 2 P11Preparation Charging the Battery Attach the battery to the AC adaptor #When the Charge indicator B turns off, charging is finished Remove the battery from the AC adaptorInserting the Battery Removing the batteryCharging environment and charging error Battery indicatorCharging time and available recording time Using the AC Adaptor Inserting the Card Open the Memory Card/battery doorRemoving the card Access to the card SD Memory Card supplied and MultiMediaCard optionalSD Memory Card MultiMediaCardTurning Power on/off Power indicator LightingSet the power switch to on Set the power switch to OFFAdjusting the Viewfinder Diopter Adjustment Adjustment dialRemove the lens ring Attach the lens hood adaptor Supplied Attaching the Lens HoodAttach the lens hood 2 supplied Remove the lens hood Reverse the lens hood and attach it Temporarily storing the lens hoodAttach the lens cap Attaching the Strap Attaching the Lens Cap Using the LCD Monitor/Viewfinder Menu display In multi/zoom playbackShutter Button Pressing halfway/Pressing fully Mode Dial Preparation Operating the Menu Press the Menu buttonSetting the Date/Time Clock Set Press the Menu button Press 1 to make the setup menu appearViewfinder, press the shutter button halfway Taking PicturesPress the shutter button fully to take the picture About the shutter jiggle Taking Pictures in Simple Mode Erasing the captured picture during the review Checking the Captured Picture ReviewAfter taking a picture, press the 4/REVIEW/SET button By pressing the shutter button fully Recording starts Recording Motion ImagesBy pressing the shutter button fully again, recording stops Using the Optical Zoom Using the Digital Zoom Taking Pictures with the Built-in Flash Press Open button to open the FlashTo close the flash Press to the direction of the arrow until it clicksUsing the Optical Image Stabilizer Press 2/1 to select ON/OFFUsing the AF Trigger Using the Focus button to prefocus the cameraUsing the Continuous AF Press Taking Pictures with the Self-timerPress the shutter button fully Taking Pictures with Audio Press the shutter button fully and take a pictureChanging the Picture Size Changing the Quality Data Compression Ratio Taking Pictures with Aperture-priority AE 6,7,8Taking Pictures with Shutter-priority AE Taking Pictures with Macro Mode Set the mode dial to Macro mode Take a pictureTaking Pictures with the Portrait Mode Set the mode dial to Portrait modeTaking Pictures with the Sports Mode Taking Pictures with the Panning Mode Set the mode dial to Panning modeTaking Pictures with the Night Portrait Mode When taking picture of only a Landscape at nightTaking Pictures with the Spot Mode Center the subject in the spot AF area Take a pictureCompensating the Exposure Taking Pictures with Auto AE Bracket Using the AF/AE Lock Set the AF/AE lock again and againUsing the Color Effect Cannot adjust the white balanceAdjusting the Color Tone or the Contrast Picture Adjustment 2,3Setting the White Balance To set manually White set Finely Adjusting the White Balance Setting ISO Sensitivity OFF Using the MC Protector/ND Filter Playing Back Still Pictures Set the mode dial to playbackFast forwarding/Fast rewinding To adjust the sound volume a 2,3During playback, rotate the zoom lever towards Images Multi PlaybackPress 3/4/2/1 to select images Using the Playback Zoom To delete a picture during the playback zoomPlaying Back Motion Images To pauseDeleting Images Delete single imageDeleted Press 2 to select YESDelete multi images Delete all imagesSingle copy setting Writing the Print Information in the Card Dpof SettingTo cancel Multi copy setting To cancel all settings Index setting/to cancelMulti setting/To cancel all settings Single setting/to cancelProtecting Images on the Card Press 3/4/2/1 for setting below Playing Back with Slide Show Automatic PlaybackPress 3/4 to select ALL/DPOF and then press Select Start and then pressTechnical use Adding Audio to Recorded Pictures Audio Dubbing Press the 4/REVIEW/SET button to stop audio recordingResizing Recorded Pictures 4,5,6,7Trimming Recorded Pictures 5,7,8Formatting the Card Adjusting the LCD Monitor/Viewfinder Brightness Using the Auto Review Monitor Setting up the Power Save Mode Resetting the File Number Initializing the settings Playing Back Images with a TV Monitor Viewing images in other countriesConnecting to a PC USB DIRECT-PRINT USB DIRECT-PRINT Single Picture Press 2 to select YES Press the 4/REVIEW/SET buttonUSB DIRECT-PRINT Dpof Picture Press 1 to select Dpof PictureTurn the power switch to OFF. P17 After UseREC mode menu Menu ItemsSimple mode menu Playback mode menuOthers Be sure to detach the battery after use Dispose of an unusable batteryAlways keep the terminals of the battery clean Optimal Use of the BatteryBattery Digital cameraCard AC adaptorLCD Monitor/Viewfinder/Lens Ring LCD monitor ViewfinderLens ring SD Slide ShowThis Memory Card is Protected Troubleshooting When connecting to PC, images Cannot be transferred Clock setting is resetThis camera chatters when it is Shaken Image is not displayed on TelevisionSpecifications Digital CameraBattery Charger/AC Adaptor Panasonic DE-928B Battery Pack lithium-ion Panasonic CGA-S002EVQT0E74

DMC-FZ2A specifications

The Panasonic DMC-FZ2A is a versatile digital camera that gained popularity for its compact design, impressive zoom capabilities, and user-friendly interface. Launched as part of Panasonic's Lumix series, the FZ2A combines advanced photographic features with innovative technology, making it an excellent choice for both amateur and experienced photographers.

One of the standout features of the DMC-FZ2A is its powerful 12x optical zoom lens, which provides a focal length equivalent to 36-432mm in 35mm film terms. This remarkable zoom range allows users to capture stunning images from a distance, making it ideal for wildlife, sports, and landscape photography. The lens is built with Leica's optical design, ensuring high-quality images with exceptional clarity and contrast, thanks to its multi-coated elements that reduce lens flare and ghosting.

Another notable aspect of the FZ2A is its 5-megapixel resolution sensor, which offers the perfect balance between image quality and manageable file sizes. This resolution is suitable for producing sharp prints and sharing images online. The camera also features various shooting modes, such as manual, aperture priority, and shutter priority, providing photographers with the flexibility to create their desired effects.

The DMC-FZ2A employs Panasonic's Optical Image Stabilization (OIS) technology, which significantly reduces the effects of camera shake, especially in low-light conditions or while using the maximum zoom. This feature is crucial for ensuring that images remain sharp and clear, enhancing the overall photography experience.

Additionally, the camera comes with a range of creative effects and filters, allowing users to experiment and add artistic flair to their images. With features like macro mode for close-up photography, burst mode for capturing fast-moving subjects, and a built-in flash for low-light environments, the FZ2A caters to a wide array of shooting scenarios.

User-friendly controls and an intuitive menu system make it easy for photographers to navigate through the camera's features with minimal effort. The DMC-FZ2A also includes a 2.5-inch LCD screen for composing shots and reviewing images, providing adequate visibility even in bright outdoor conditions.

Overall, the Panasonic DMC-FZ2A stands out as a remarkable digital camera that successfully blends impressive optical performance with user-friendly functionality. Whether you're capturing everyday moments or exploring creative photography, the DMC-FZ2A offers the tools to realize your vision effectively and with ease.
Top Page Image Contents