Panasonic DMC-FZ2A operating instructions Digital camera, Card, Battery, AC adaptor

Page 97

Others

ªCondensation

When condensation has taken place:

Set the power switch to [OFF] and leave the digital camera in this condition for about 1 hour.

When the camera becomes close to the ambient temperature, the fog disappears naturally.

ªCautions for Storage

Before storing the digital camera, take the card out and detach the battery. Store all the components in a dry place with a relatively stable temperature. (Recommended temperature:

15oC to 25oC,

Recommended humidity: 40% to 60%)

Digital camera

Wrap it with a soft cloth to prevent dust from getting into the camera.

Do not leave the camera in places that expose it to high temperature.

Store the battery in a completely discharged state. To store the battery for a long period of time, we recommend you charge it once every year and store it again after you completely use up the charged capacity.

Card

When the card is being read, do not remove the card, turn off the power, or subject it to vibration or impact.

Do not leave the card in places where there is high temperature or direct sunlight, or where electromagnetic waves or static electricity are easily generated.

Do not bend or drop the card. The card or the recorded content may be damaged.

After use, be sure to remove the card from the digital camera.

Do not touch the terminals on the back of the card with your fingers. Do not allow dirt, dust or water to enter it.

Battery

Do not leave the camera and the battery at the place where the temperature is too high, such as inside the car during the midsummer.

Extremely high or low temperatures will shorten the life of the battery.

If the battery is kept in smoky or dusty places, the terminal may rust and cause malfunctions.

Do not allow the battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation and, if you touch the battery in this condition, you may be badly burned.

AC adaptor

If the battery is warm, charging takes a longer time than normal.

If you use the AC adaptor near a radio, radio reception may be disturbed. Keep the AC adaptor 100 cm or more away from radio.

When the AC adaptor is in use, it may generate whirring sounds. However, this is normal.

After use, be sure to disconnect the AC cable. (If it is left connected, a minute amount of current is consumed)

Keep the electrodes of the AC adaptor and battery always clean.

97

Image 97
Contents Operating Instructions Dear Customer Information for Your SafetyContents Others Standard Accessories Front View Names of the ComponentsUp View Back ViewLeft View Battery Charger/AC AdaptorRight View Bottom ViewRecording LCD Monitor Display/Viewfinder DisplayInternet Recording in Simple mode PlaybackQuick Guide Charge the battery # 2 P11Preparation Attach the battery to the AC adaptor # Charging the BatteryWhen the Charge indicator B turns off, charging is finished Remove the battery from the AC adaptorRemoving the battery Inserting the BatteryCharging environment and charging error Battery indicatorCharging time and available recording time Using the AC Adaptor Inserting the Card Open the Memory Card/battery doorRemoving the card SD Memory Card supplied and MultiMediaCard optional Access to the cardSD Memory Card MultiMediaCardPower indicator Lighting Turning Power on/offSet the power switch to on Set the power switch to OFFAdjustment dial Adjusting the Viewfinder Diopter AdjustmentRemove the lens ring Attach the lens hood adaptor Supplied Attaching the Lens HoodAttach the lens hood 2 supplied Remove the lens hood Reverse the lens hood and attach it Temporarily storing the lens hoodAttach the lens cap Attaching the Strap Attaching the Lens Cap Menu display In multi/zoom playback Using the LCD Monitor/ViewfinderShutter Button Pressing halfway/Pressing fully Mode Dial Preparation Press the Menu button Operating the MenuPress the Menu button Press 1 to make the setup menu appear Setting the Date/Time Clock SetViewfinder, press the shutter button halfway Taking PicturesPress the shutter button fully to take the picture About the shutter jiggle Taking Pictures in Simple Mode Erasing the captured picture during the review Checking the Captured Picture ReviewAfter taking a picture, press the 4/REVIEW/SET button By pressing the shutter button fully Recording starts Recording Motion ImagesBy pressing the shutter button fully again, recording stops Using the Optical Zoom Using the Digital Zoom Press Open button to open the Flash Taking Pictures with the Built-in FlashPress to the direction of the arrow until it clicks To close the flashPress 2/1 to select ON/OFF Using the Optical Image StabilizerUsing the Focus button to prefocus the camera Using the AF TriggerUsing the Continuous AF Press Taking Pictures with the Self-timerPress the shutter button fully Press the shutter button fully and take a picture Taking Pictures with AudioChanging the Picture Size Changing the Quality Data Compression Ratio 6,7,8 Taking Pictures with Aperture-priority AETaking Pictures with Shutter-priority AE Set the mode dial to Macro mode Take a picture Taking Pictures with Macro ModeSet the mode dial to Portrait mode Taking Pictures with the Portrait ModeTaking Pictures with the Sports Mode Set the mode dial to Panning mode Taking Pictures with the Panning ModeWhen taking picture of only a Landscape at night Taking Pictures with the Night Portrait ModeCenter the subject in the spot AF area Take a picture Taking Pictures with the Spot ModeCompensating the Exposure Taking Pictures with Auto AE Bracket Set the AF/AE lock again and again Using the AF/AE LockCannot adjust the white balance Using the Color Effect2,3 Adjusting the Color Tone or the Contrast Picture AdjustmentSetting the White Balance To set manually White set Finely Adjusting the White Balance Setting ISO Sensitivity OFF Using the MC Protector/ND Filter Playing Back Still Pictures Set the mode dial to playbackFast forwarding/Fast rewinding 2,3 To adjust the sound volume aDuring playback, rotate the zoom lever towards Images Multi PlaybackPress 3/4/2/1 to select images To delete a picture during the playback zoom Using the Playback ZoomTo pause Playing Back Motion ImagesDelete single image Deleting ImagesDeleted Press 2 to select YESDelete all images Delete multi imagesSingle copy setting Writing the Print Information in the Card Dpof SettingTo cancel Multi copy setting Index setting/to cancel To cancel all settingsMulti setting/To cancel all settings Single setting/to cancelProtecting Images on the Card Playing Back with Slide Show Automatic Playback Press 3/4/2/1 for setting belowPress 3/4 to select ALL/DPOF and then press Select Start and then pressTechnical use Press the 4/REVIEW/SET button to stop audio recording Adding Audio to Recorded Pictures Audio Dubbing4,5,6,7 Resizing Recorded Pictures5,7,8 Trimming Recorded PicturesFormatting the Card Adjusting the LCD Monitor/Viewfinder Brightness Using the Auto Review Monitor Setting up the Power Save Mode Resetting the File Number Initializing the settings Viewing images in other countries Playing Back Images with a TV MonitorConnecting to a PC USB DIRECT-PRINT Press 2 to select YES Press the 4/REVIEW/SET button USB DIRECT-PRINT Single PicturePress 1 to select Dpof Picture USB DIRECT-PRINT Dpof PictureAfter Use Turn the power switch to OFF. P17Menu Items REC mode menu Playback mode menu Simple mode menuOthers Dispose of an unusable battery Be sure to detach the battery after useAlways keep the terminals of the battery clean Optimal Use of the BatteryDigital camera BatteryCard AC adaptorViewfinder LCD Monitor/Viewfinder/Lens Ring LCD monitorLens ring SD Slide ShowThis Memory Card is Protected Troubleshooting Clock setting is reset When connecting to PC, images Cannot be transferredThis camera chatters when it is Shaken Image is not displayed on TelevisionDigital Camera SpecificationsBattery Pack lithium-ion Panasonic CGA-S002E Battery Charger/AC Adaptor Panasonic DE-928BVQT0E74