Panasonic DMC-FX9GN Press the single or burst mode, Button to switch the burst mode, Mode

Recording pictures (basic)
Taking Pictures using Burst Mode
	∫ Number of pictures recorded in burst
	mode
1 Press the single or burst mode	Burst speed	Number of recordable
button to switch the burst mode	(pictures/	pictures (pictures)
	second)
setting and then take pictures.
	3¢2	max. 6	max. 8
	2¢2	max. 6	max. 8
3	approx. 1.5	Depends on remaining
		capacity of the card

¢2 The burst speed is constant regardless of the transfer speed of the card.

• When the shutter speed is faster than 1/60 and the flash is not activated.

: High speed

;

: Low speed

;

: Unlimited¢1

;

No display: cancelled

¢1 Depending on the memory size, battery power, picture size and quality (compression)

•Hold down the shutter button fully to activate the burst mode.

•When the burst mode setting is set to Unlimited

–You can take pictures until the capacity of the card becomes full.

–The burst speed becomes slower halfway. Depending on the picture size or card, the time the speed becomes slower differs.

•The focus is fixed at taking the first picture.

•In simple mode [], the burst speed is fixed to Low.

•When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.

•When the burst mode is activated, [AUDIO REC.] cannot be used.

•When the flash is activated or [STARRY SKY] (P62) in scene mode is selected, you can take only 1 picture.

•When setting auto bracket and the burst mode simultaneously, auto bracket will be performed.

44

VQT0S74