Panasonic DMC-FZ1PP To close the flash, Press in the direction of the arrow Until it clicks

Page 36

Recording images (basic)

: Forced OFF

	3	When you do not open the flash, this mode
	3	is set. Even in dark places, the flash does
		is set. Even in dark places, the flash does
		not fire.
		Set it when you take pictures in places
		where using flash is not allowed.
	3	Take a picture.

• The recording method is the same as in “Taking Pictures”. (P28)

4

To close the flash

4Press in the direction of the arrow

until it clicks.

• Be sure to close the flash when you do not use it.

•Do not stare at the flash light from close proximity when using the flash.

•The available flash range is about 0.98 feet (30 cm) - 6.86 feet (2.1 m). (when setting to ISO100)

•When the shutter jiggle alert is displayed within the available flash range, we recommend using the flash.

•Do not cover the flash sensor 1 with your finger or any other item. Otherwise the picture will not be exposed properly.

•In motion image mode [ ] or when the flash is closed, flash setting is fixed to the Forced OFF [ ].

•When you set to burst mode or auto bracket, only 1 picture is taken for every flash firing.

•In night portrait mode [], setting is fixed to Slow sync./Red-eye reduction

[ ].

•When you take a picture using the flash with the lens hood attached, the flash light may be interrupted by the hood.

•The flash indication becomes red when pressing the shutter button halfway.

•When the flash is being charged, the flash indication blinks red, and you cannot take a picture even when you press the shutter button fully.

•When using the flash, do not let subjects get too close to the flash. The shape or color of subjects may be changed because of the heat and light of the flash.

•Be sure to open the flash entirely when using the flash.

•When taking a picture with the flash, the white balance will be automatically adjusted (except for manual white balance setting), but the white balance may not be properly adjusted when the flash light is insufficient.

•When taking a picture with the flash after setting the white balance manually, the white balance may not be properly adjusted. We recommend setting the white balance to [AUTO] when using the flash. (P55)

36

Image 36

Contents Operating Instructions Information for Your Safety Dear CustomerFCC Note U.S. only Contents Standard Accessories OthersNames of the Components Front ViewTop View Back ViewLeft View Right ViewBottom View LCD Monitor Display/Viewfinder Display RecordingRecording in Simple mode PlaybackQuick Guide PreparationCharging the Battery Attach the battery to the AC adaptor #When the Charge indicator B turns off, charging is finished Remove the battery from the AC adaptorInserting the Battery Inserting the batteryRemoving the battery Open the Memory Card/battery doorBattery indicator Connecting to an Electrical Outlet Inserting the Card Inserting the cardRemoving the card SD Memory Card MultiMediaCardTurning Power on/off Set the power switch to onSet the power switch to OFF LightingAdjusting the Viewfinder Diopter Adjustment Adjust the diopter, rotating the diopter adjustment dialAttaching the Lens Hood Remove the lens ring Attach the lens hood adaptor SuppliedAttach the lens hood 2 supplied Remove the lens hood Reverse the lens hood and attach it Attach the lens capAttaching the Strap Attaching the Lens Cap Pass the top of the string through the lens capUsing the LCD Monitor/Viewfinder Menu display In multi/zoom playbackRecording Playback Shutter Button Pressing halfway/Pressing fully Mode Dial Operating the Menu Press the Menu buttonSetting the Date/Time Clock Set Press the Menu button Press 1 to make the setup menu appearSet the mode dial to normal picture mode Taking PicturesViewfinder, press the shutter button halfway Press the shutter button fully to take the pictureAbout shutter jiggle Taking Pictures in Simple Mode Checking the Captured Picture Review After taking a picture, press the 4/ REVIEW/SET buttonRecording Motion Images Using the Optical Zoom Using the Digital Zoom Taking Pictures using the Built-in Flash Press Open button to open FlashTo close the flash Press in the direction of the arrow Until it clicksUsing the Optical Image Stabilizer Using the AF Trigger Using the Focus button to prefocus the cameraUsing the Continuous AF Taking Pictures with the Self-timer Press the buttonPress the shutter button fully Taking Pictures with Audio Press the shutter button fully and take a pictureChanging the Picture Size Changing the Quality Data Compression Ratio Taking Pictures using Macro Mode Set the mode dial to Macro mode Take a pictureTaking Pictures using Portrait Mode Taking Pictures using Sports Mode Set the mode dial to Sports modeTaking Pictures using Panning Mode Taking Pictures using Night Portrait Mode Taking Pictures using Spot Mode Center the subject in the spot AF area Take a pictureCompensating the Exposure Press the button Press 2/1 to compensate the exposureTaking Pictures using Auto Exposure AE Bracket Press the button twice to Select Auto BracketUsing the AF/AE Lock Set the AF/AE lock again and againUsing the Color Effect Press 3/ 4 to select COL.EFFECTPress 2/1 to select OFF, COOL, Warm or B/W Picture Adjustment Natural/Standard/Vivid Setting the White Balance Press 2/1 to set to white set PressSetting ISO Sensitivity Taking Pictures using Burst Mode OFFUsing the MC Protector/ND Filter Set the mode dial to playback Playing Back Still PicturesFast forwarding/Fast rewinding Playing Back Still Pictures with Audio 2,3Images Multi Playback During playback, rotate the zoom lever towardsPress 3/4/2/1 to select images Using the Playback Zoom To delete a picture during the playback zoomPlaying Back Motion Images To pauseDeleting Images Delete single imageDelete multi images Delete all imagesWriting the Print Information to the Card Dpof Setting Single copy settingTo cancel Multi copy setting To cancel all settings Index setting/to cancelSingle setting/to cancel Multi setting/to cancel, To cancel all settingsProtecting Images on the Card Press 3/4/2/1 for setting below Playing Back with Slide Show Automatic PlaybackPress 3/4 to select Slide Show Technical use Adding Audio to Recorded Pictures Audio Dubbing Press the 4/REVIEW/SET button to stop audio recordingResizing Recorded Pictures 4,5,6,7Trimming Recorded Pictures Press the 4/REVIEW/SET button Press the Menu buttonFormatting the Card Adjusting the LCD Monitor/Viewfinder Brightness Using the Auto Review Setting up the Operational Sound Press the Menu button Press 1 to open the setup menuSetting up the Power Save Mode Resetting the File Number Initializing the settings Playing Back Images with a TV Monitor Connect the A/V cable to the A/V OUT socket of the cameraConnecting to a PC USB DIRECT-PRINT USB DIRECT-PRINT Single Picture USB DIRECT-PRINT Dpof Press 2/1 to select DpofTurn the power switch to OFF. P17 After UseREC mode menu Menu ItemsSimple mode menu Playback mode menuOthers Optimal Use of the Battery Always keep the terminals of the battery cleanBe sure to detach the battery after use Dispose of an unusable batteryBattery Digital cameraCard AC adaptorViewfinder Lens ringSD Slide Show Folder CompositionThis Memory Card is Protected Troubleshooting Specifications Digital CameraBattery Pack lithium-ion Panasonic CGA-S002A Panasonic DE-928ADigital Camera Accessory System Accessory# DescriptionDigital Camera Accessory Order Form For USA CustomersRequest for Service Notice Limited Warranty For USA Only Limited Warranty CoverageCarry-In or Mail-In Service Customer Services Directory For USA Only Accessory PurchasesIndex DpofSpanish Quick Use Guide Guía española para el uso rápido PreparacionesGrabación ReproducciónMemo Panasonic Canada Inc