Panasonic DMC-LC43PP operating instructions Adding Audio to Recorded Pictures Audio Dubbing

Technical use

Adding Audio to Recorded Pictures (Audio Dubbing)

1,6 2,3,4,5

2

PLAY1/2 SETUP

PROTECT

DPOF PRINT

SLIDE SHOW

AUDIO DUB.

RESIZE

SELECT SET EXIT MENU

3,4

AUDIO		2304
	DUB.

SELECT
START	EXIT MENU

It is possible to add a 10-second narration to a recorded picture.

[Preparation]

• Set the mode dial to playback [ ]. (P23)

1Press the [MENU] button.

2Press 3/4 to select [AUDIO DUB.] and then press 1.

3Press 2/1 to select the picture.

4Press the 4/[REVIEW/SET] button, to start audio recording. (1 Microphone)

•When audio has already been recorded, after the audio dubbing the original audio is overwritten.

•When audio has already been recorded,

this message is displayed “OVERWRITE AUDIO DATA?”. Then press 2/1 to

select [YES] and press the

4/[REVIEW/SET] button, to start audio recording.

5Press the 4/[REVIEW/SET] button, to stop audio recording.

•Even if you do not press the

4/[REVIEW/SET] button, after about 10 seconds the audio recording stops automatically.

6Press the [MENU] button 2 times.

•The menu will disappear.

•Adding audio will use additional memory. Using this feature will result in fewer images being able to be saved.

•The audio dubbing cannot be used with motion images.

•The audio dubbing cannot be used with protected images.

67