Panasonic DMC-TZ65 LCD Mode, Auto Power LCD, High Angle, Display Size Standard /LARGE, Pattern

Using SETUP menu (Continued)

Item			Settings, notes
LCD MODE	OFF: Normal (cancel setting)
Make LCD monitor easier		AUTO POWER LCD:
to see.		The brightness is adjusted automatically depending on
		how bright it is around the camera.
		POWER LCD:
		Makes screen brighter than normal (for outdoor use).
		HIGH ANGLE:
		Makes screen	easier	to see when taking pictures from
		high positions. (becomes harder to see from the front)

•‘HIGH ANGLE’ will be cancelled when power is turned off (including POWER SAVE).

•Block out sunlight (with hand, etc.) if reflection makes screen difficult to see.

•‘AUTO POWER LCD’ or ‘HIGH ANGLE’ cannot be used in the following cases. During playback mode or menu screen display, or when connected to computer/printer.

•‘POWER LCD’ will be deactivated if no operations are performed for 30 seconds while recording. (Brightness can be restored by pressing any button)

•Brightness/colour of screen in ‘LCD MODE’ has no effect on pictures recorded.

•‘AUTO POWER LCD’ cannot be set in playback mode.

•The number of recordable pictures and the recording time are reduced when using ‘AUTO POWER LCD’ or ‘POWER LCD’.

DISPLAY SIZE	STANDARD/LARGE
Change the display size
of the menu.
GUIDE LINE	REC. INFO.
Select recording	OFF/ON (Display recording information with guide lines.)
information display and
	PATTERN
types of guidelines.
	/	: Change the patterns of guide lines.
(P.42)
HISTOGRAM	OFF/ON
Check subject brightness
on graph. (P.42)
REC AREA	OFF/ON		This section is not
Enables verification of	• Recordable area displayed for motion		recorded.
the recordable area for	pictures should be interpreted as a
	guideline.
a motion picture before
	• When using extended optical zoom,
recording.	the recordable area may not always be
	displayed for certain zoom ratios.

•This setting cannot be used with Intelligent Auto Mode.

22
	VQT1Z93	The ‘REC AREA’ menu item is not available in the DMC-TZ6/DMC-TZ65.

See P.18 for the setting procedure in the SETUP menu.

Item	Settings, notes
ECONOMY	POWER SAVE
Turn off LCD monitor	OFF/2MIN./5 MIN./10MIN. :
and power while not	Automatically shut off power while not in use.
in use to save battery	• To restore → Press the shutter button halfway, or turn on
consumption.
	the power again.
	• Cannot be used in the following cases:
	When using AC adaptor (DMW-AC5E, optional), when
	connected to computer/printer, during motion picture
	recording/playback, during slideshows
	• Settings fixed to ‘2 MIN.’ in ‘AUTO LCD OFF’ (below),
	‘5 MIN.’ in INTELLIGENT AUTO Mode or CLIPBOARD
	Mode, or ‘10 MIN.’ while slideshow is paused.
	AUTO LCD OFF
	OFF/15SEC./30SEC. :
	LCD monitor is shut off if no operations are performed for
	a set period while recording. (Status indicator is illuminated
	while monitor is off.)
	• Cannot be used in the following cases:
	When using INTELLIGENT AUTO Mode, CLIPBOARD
	Mode, or AC adaptor (DMW-AC5E, optional), when menu
	screen is displayed, when using self-timer setting or
	during motion picture recording.
	• To restore → Press any button.
AUTO REVIEW	OFF: No auto review
	1 SEC./2 SEC. : Automatically display for 1 or 2 seconds.
Automatically display
pictures immediately	HOLD: Auto review screen remains until a button (other
after taking them.	than the display button) is pressed
	ZOOM: Displays for 1 second, then at 4x zoom for 1
	second
	• Fixed to ‘2 SEC.’ in INTELLIGENT AUTO Mode.
	• In ‘SELF PORTRAIT’, ‘PANORAMA ASSIST’, ‘HI-SPEED
	BURST’, and ‘FLASH BURST’ scene modes, ‘AUTO
	BRACKET’, ‘MULTI ASPECT	’, ‘BURST’ Mode, or
	pictures with audio, auto review performed regardless of
	setting.
	• Motion pictures cannot be automatically reviewed.
		VQT1Z93 23