Panasonic DMCTS2D, DMCTS2S, DMCTS2A, DMC-TS2 operating instructions Charging the Battery

Page 21

Charging the Battery

∫About batteries that you can use with this unit

The battery that can be used with this unit is DMW-BCF10PP.

It has been found that counterfeit battery packs which look very similar to the genuine product are made available to purchase in some markets. Some of these battery packs are not adequately protected with internal protection to meet the requirements of appropriate safety standards. There is a possibility that these battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack. To ensure that safe products are used we would recommend that a genuine Panasonic battery pack is used.

•Use the dedicated charger and battery.

•The camera has a function for distinguishing batteries which can be used safely. The dedicated battery (DMW-BCF10PP) supports this function. The only batteries suitable for use with this unit are genuine Panasonic products and batteries manufactured by other companies and certified by Panasonic. (Batteries which do not support this function cannot be used). Panasonic cannot in any way guarantee the quality, performance or safety of batteries which have been manufactured by other companies and are not genuine Panasonic products.

∫Charging

•The battery is not charged when the camera is shipped. Charge the battery before use.

•Charge the battery with the charger indoors.

•It is recommended to charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)

Attach the battery paying attention to the direction of the battery.

Connect the charger to the electrical outlet.

• Disconnect the charger from the
electrical socket and detach the battery	90
after charging is completed.

(ENG) VQT2M30 21

Image 21

Contents Basic Operating Instructions Carefully observe copyright laws Dear CustomerInformation for Your Safety FCC Note Declaration of ConformityTrade Name Panasonic Model No About the battery pack Battery pack Lithium ion battery packAbout the battery charger Battery charger Contents VQT2M30 ENG Handling of the camera About the Precautions demonstration displayMaintenance and Waterproof Performance Lock switch gray part Locked stateReleased state If there is any foreign object, remove with attached brush 12 VQT2M30 ENG Lock switch gray part Released state Locked state Using the camera underwater Causes of water leak Caring of the camera after using it underwater This unit incorporates a drain design Water droplet Battery CardIndicated as battery charger or Standard AccessoriesBattery Case Charger in the text USB Connection Cable AV CablePress Names of the ComponentsCard/Battery door Release lever Lock switch 1213 Hdmi socket 19 AV/DIGITAL/MULTI socketTripod receptacle Charging Charging the BatteryCharge About the Charge indicatorCharging time Recording conditions by Cipa standardAbout the Built-in Memory/the Card Built-in MemoryCard DDo not touch the connection terminals of the card Inserting and Removing the Card optional/the BatterySetting Date/Time Clock Set ‚ Cancel without setting the clockSelect Clock SET in the REC or Setup menu, and press Switching to the Setup menu Setting the MenuSelecting the REC Mode REC Mode ñ Taking Pictures Using the Automatic FunctionScene Detection Recording Motion Picture REC Mode ñ· ¿Once deleted, pictures cannot be recovered Playback Mode ¸Playing Back Pictures Normal Play Deleting PicturesFor Windows For Macintosh Specifications Hi-speed Burst Burst speed Metering ModeNumber Recordable PicturesAnalog video/audioNTSC InterfaceTerminal AV/DIGITAL OperatingBattery Pack lithium-ion Panasonic InputOutput Accessory# Illustration Digital Camera Accessory SystemVisa Digital Camera Accessory Order FormOnly for U.S.A. and Puerto Rico Limited WarrantyMail-In Service 42 VQT2M30 ENG Customer Services Directory United States and Puerto Rico