1:With the [LOCK] switch released, close the card/ battery door and terminal cover by pushing until you hear a click.
•To prevent water seeping into the camera, be careful not to trap foreign objects such as liquids, sand, hair or dust etc.
•Closing the door with the [LOCK] switch in the locked state may result in damage or leaks.
2:Slide the [LOCK] switch in the direction of the arrow until the visible red area is no longer visible and the switch is locked.
•If you use the camera without securely closing the door and cover, it may open and close of its own accord.
N: Red area
O: [LOCK] switch (gray part)
P: Released state
Q: Locked state
Note
•If there is any foreign object, remove it
with attached brush.
• Sand and dust etc. will unintentionally adhere to the camera by lodging in between the gap around the card/ battery door or terminal cover when used in the following locations:
– Where sand is floating, such as in the sea or water etc.
–Where there is a lot of sand or dust, such as at the beach or in a sand box etc.
•To prevent unintentional opening of the card/battery door and terminal cover, it is recommended to use the supplied silicon jacket.
(ENG) VQT2M30 13