Jura Capresso IMPRESSA X70 Programming Filter, Programming Economy Mode, Programming Timer Clock

12.4Programming FILTER

Please read chapter 7.1 “Placing filter”.

12.5Programming WATER HARDNESS (only with setting FILTER NO)

 HARDNESS LEVEL 3

Press key P

By pressing key + or - briefly you can programme the water hardness level.

Then press key P briefly to store the water hardness level in memory.

You can call up the next setting by pressing key + .

To determine the water hardness level please read chapter 6. “Adjusting for water hardness”.

12.6 Programming ECONOMY MODE

 ECONOMY MODE OFF

Press key P

 ECONOMY (MODE OFF flashes)

By briefly pressing key + or - you can programme the mode you would like.

Then press key P briefly to store mode in memory

You can call up the next setting by pressing key + .

You can programme your machine to “economy mode”. In the setting ECONOMY MODE ON the steam heating- system is switched off. The heating for the cup warming tray is switched off too. If you want to draw off steam you need to press the steam key , warning lamps flash and your machine heats up.

After 10 minutes the steam heating-system switches off automatically. The warning lamps go out. By pressing the steam key anew, you return to stand-by-status for drawing off steam.

ECONOMY MODE OFF means that the stand-by-status for steam is set to 10 minutes and the heating for the cup warm- ing tray is on. After 10 minutes the heating-system switches down to a stand-by temperature. By pressing the steam key anew, the machine returns to stand-by-status for drawing off steam.

12.7 Programming TIMER CLOCK

A programming of the timer clock is necessary if an automa- tic switch on time is required.

 TIME –.–

Press key P .

 By briefly pressing key	+ or -	you can set the hours and then	E
confirm by pressing key	P .

By briefly pressing key + or - you can set the minutes and then confirm by pressing key P .

You can call up the next setting by pressing key + .

12.8Programming automatic switch on time

A programming of the timer clock is necessary if an auto- matic switch on is needed.

 UNIT ON –.–

Press key P .

By briefly pressing key + or - you can set the hours and then confirm by pressing key P .

By briefly pressing key + or - you can set the minutes and then confirm by pressing key P .

You can call up the next setting by pressing key + .

13