Jura Capresso IMPRESSA X70 manual Decalcifying water sector, Disposal, Tips for a perfect coffee

Pour 0.6 litres of water into a container and completely dis- solve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank.

 COFFEE SECTOR / UNIT DECALCIFYING

 Inside the machine the decalcifying agent is conducted to the

	drip tray.
	EMPTY TRAY
	FILL WATER
	PRESS CALC
	COFFEE SECTOR / UNIT DECALCIFIYING
 Inside the machine the water is conducted to the drip tray.
	EMPTY TRAY / CLEAN CONTACTS
	(please refer to chapter 13.8)
	PLEASE WAIT
	RINSE UNIT

 Place a container under the coffee-spout (15) and press rinsing

	key .
	UNIT RINSING
	COFFEE READY

15.2 Decalcifying water sector

This message will only appear if the unit is ready to draw off water or steam.

Remove and empty water tank.

Replace empty water tank.

Switch off your machine by pressing ON / OFF key.

Open cover (3).

Press key until you can hear an acoustic signal.

 EMPTY TRAY

 AGENT IN TANK

 AGENT IN TANK / CHOOSE SECTOR / PRESS CALC

Place a container under the pivoting nozzle and turn selector switch for coffee or hot water/steam (19) to the symbol .

Press key .

 UNIT DECALCIFIYING / WATER SECTOR

 FILL WATER

Rinse water tank well and top it up with fresh tap water.

 PRESS CALC

 WATER SECTOR / UNIT DECALCIFYING

 CLOSE TAP

 RINSE UNIT

 UNIT RINSING

 COFFEE READY

16. Disposal E

For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG.

17. Tips for a perfect coffee

Height adjustable coffee-spout

You can adjust the height of the coffee-spout to your cup sizes.

Grinding

Please refer to chapter 3.4 “Adjusting grinder”.

Pre-warm cups

You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is.

Sugar and cream

Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee.

17