Jura Capresso IMPRESSA X70 manual Drawing off hot water, Using steam, Switching off machine

 FILL POWDER

Now put 1 or 2 level measuring spoons of pre-ground coffee into the pre-ground powder funnel (14).

Put 1, respectively 2 cups under the coffee-spout and press the required key.

Never use soluble instant coffee or quick coffee. Only use coffee powder from freshly ground beans or pre-ground va- cuum-packed coffee. Never fill the funnel with more than 2 portions of coffee powder at a time. The powder funnel is not intended as a storage container.

If selector key is pressed by mistake this can be correc- ted by pressing one of the coffee keys.

9. Drawing off hot water

Press selector key for hot water . Wait until the flashing of the lamp turns into a constant light.

Put a cup under the pivoting nozzle and turn selector switch for

coffee or hot water / steam (19) to the symbol . The machine will now deliver hot water.

 WATER SUPPLIED

To stop this process turn selector switch for hot water / steam

(19)back to the symbol . The cup should only be removed when the hot water has stopped its flow.

The machine has a stand-by-status for hot water. If you want to alternate between drawing off coffee and hot water, the selector switch for hot water can be left turned on . If you draw off hot water only once, then the selector switch for hot water should be turned off by pressing the selector key anew.

When hot water is first drawn off, there is a possibility of spattering. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

10. Using steam

Steam can be used for heating up liquids as well as for frothing up milk for cappuccinos.

To heat up liquids remember to push the frothing nozzle (21) up. For frothing up liquids push the frothing nozzle (21) down (Fig. 4).

Press selector key for steam . Wait until the flashing of the lamp turns into a constant light.

Put a cup under the pivoting nozzle (20).

Immerse the frothing nozzle (21) into the milk you want to froth or into the liquid you want to heat up. Turn selector switch for coffee or hot water / steam (19) to the symbol .

 STEAM INTAKE

To stop steam-function turn selector switch for coffee or hot wa- ter / steam (19) back to the symbol .

After drawing off steam immediately draw off approx. 1dl of		E
water and clean the outside of the nozzle with a cloth.
If you want to draw off steam several times, the selector key
for steam can be left on. The drawing off of steam is on
stand-by-status. If you draw off steam only once, then the
selector switch for steam	should be turned off by pressing
the selector key anew.

When steam is first drawn off, there is a possibility of spat- tering. The pivoting nozzle becomes hot. Avoid direct contact with the skin.

11. Switching off machine

When the machine is switched off, the rinsing program is auto- matically run again. Therefore place an empty container under the coffee-spout (15) and press ON/OFF key . When the rinsing water has run into the container, the machine powers down. Discard the water.

11