2If there are more than 2 registered handsets,
the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll :to the specific
handset you want to call and press mSELECT.
6.10.2Transfer an external call to another
handset
1During the call, press and hold ckey to put the external call on hold (the caller can no longer hear you).
•Intercom is established immediately if there are only 2 registered handsets.
2If there are more than 2 registered handsets,
the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll : to the specific
handset you want to call and press mSELECT.
•The called handset rings.
3Press rkey on the called handset to answer the internal call, where both internal callers can talk.
•Intercom is established.
4Press ekey on the first handset to transfer the external call to the called handset.
•The external call is transferred.
Note
If there is no answer from the called handset, press ckey to resume the external call.
6.10.3Answer an external call during intercom
1When there is an incoming external call during an intercom, a new call tone is emitted.
2To answer the external call and end the intercom, press r.
• Connection with the external call is established.
Tip
To put the internal call on hold and answer the incoming external call, press ckey.
6.10.4Switch between an internal and external call
To switch between an internal or external call, press ckey.
6.10.5 Establish a three-party conference call
The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
1During the call, long press ckey to put the external call on hold (the caller can no longer hear you).
•Intercom is established immediately if there are only 2 registered handsets.
2If there are more than 2 registered handsets,
the handset numbers which are available for intercom will be displayed. Scroll :to All Handsets and press mSELECT to call all the handsets or scroll : to the specific
handset you want to call and press mSELECT.
•The called handset rings.
3Press rkey on the called handset to answer the internal call, where both internal callers can talk.
•Intercom is established.
4Press and hold ckey for 2 seconds on the first handset to start the
•CONFERENCE will be displayed on the
screen once the conference call is established.
Tip
If CONFERENCE mode is activated (see “Activate/Deactivate Conference mode” on page 33), a
24 | Use more of your phone |
