Sherwood RX-773 manual Connecting Multi-Roomsystem Kit, Switched Ac Outlet, Ac Input Cord, English

6. CONNECTING MULTI-ROOM SYSTEM KIT

• The multi-room system kit(sold separately ) is essential for operation from a remote location .

For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.

•IR IN jack allows you to control this receiver from another room with the remote control unit.

•To control this receiver from another room with the remote control unit, connect the IR IN jack to the output of the connecting block.

•If this receiver is located inside a cabinet or other enclosure where the infrared beams from the remote control unit cannot enter, then operation with the remote control unit will not be possible. In such a case, connect the IR IN jack to the output of the connecting block.

•To control other compatible component from another room with the universal remote control unit, connect the IR OUT jack to the IR emitter.

Note: Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted fluorescent.

7. SWITCHED AC OUTLET

•This outlet is switched on (power-on mode) and off (standby mode) according to power control as follows (Maximum total capacity is 100 W (0.43A)).

Standby mode - Switched AC outlet off

Power - on mode - Switched AC outlet on

8. AC INPUT CORD

• Plug the cord into an wall AC outlet.

ENGLISH

7