Sherwood RX-773 manual Using a punch-throughfunction, Removing a punch-throughfunction, English

ENGLISH

Using a punch-through function

This remote control may be programmed to operate either the AUDIO volume punch-through or the TV volume and/or TV channel punch-through in conjunction with any of the eight components controlled by this remote control.

For example, since this receiver will likely be used as the sound system while watching TV, you may want to adjust this receiver’s volume although this remote control is set to control the TV.

• When programming this remote control for the AUDIO volume punch-through, press and hold down both "AUD" button and "VOLUME " button for more than 1 second.

• If programming is performed successfully, the LED will flicker twice.

• When you want either TV volume or TV channel punch- through, press and hold down both "TV" button and either "VOLUME " or "CHANNEL " button for more than 1 second.

Note: If you use one of AUDIO and TV volume punch- through functions, you cannot use the other.

Removing a punch-through function

• When removing the AUDIO volume punch-through, press and hold down both "AUD" button and "VOLUME " button for more than 1 second.

•If removing is performed successfully, the LED will flicker twice.

•When you want to remove either TV volume or TV channel punch-through, press and hold down both "TV" button and either

"VOLUME " or "CHANNEL " button for more than 1 second.

14