3 Push into place until a click sound is heard.
4 Getting started
4.1Connect the base station
1Place the base station in a central location near the telephone line socket and electricity socket.
4.1.1 Wall Mounting
Wall mount installation is allowable in SE745. The wall mount holes are located on the back of the base unit and no extra wall mount pedestal is needed. If you want to mount the phone on a wall, simply slip the mounting holes on the back of the base unit over the wall plate posts (not included), and slide the unit down into place.
Warning
1Please use ONLY UL approved wall plate.
2Please use wall plate that can sustain at least 5.1kg.
3Please ensure the wall plate has appropriate and rigid mounting.
4.1.2Install the base support
Note
The base station is wall mountable. Remove the base support before mounting it to the wall.
1Place the base station face down so that you can see the bottom of the base station.
2Attach the base support to your base station by fitting the tabs of the base support into the corresponding slots on the base unit.
Bottom of the base support
4To remove, simply pull the base support away from the base unit.
4.1.3Connect the line cord and power cable
1Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown.
2Connect the other end of the line cord to the telephone line socket and the other end of
the power cable to the electricity socket.
Note
The line adaptor may not be attached to the line cord. In this case, you have to connect the line adaptor to the line cord first before plugging the line cord to the line socket.
Warning
Avoid placing the base station too close to large metal objects such as filing cabinets, radiators or electrical appliances. This can impair the range
12 | Getting started |
