2 Important

Take time to read this user manual before you use your phone. It contains important information and notes regarding your phone.

NOTICE: This product meets the applicable Industry Canada technical specifications. The equipment must be installed using an acceptable method of connection. The customer should be aware that compliance with the above conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe systems, if present, are connected together. This precaution may be particularly

important in rural areas.

CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electric inspection authority, or

electrician, as appropriate.

NOTES: This equipment may not be used on coin service provided by the telephone company.

2.1 Power requirements

This product requires an electrical supply of 220-240 volts AC. In case of power failure, the communication can be lost.

The Electrical network is classified as hazardous. The only way to power down the charger is to unplug the power supply from the electrical outlet. Ensure that the electrical outlet is always easily accessible.

The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard UL 60950.

Warning

To avoid damage or malfunction:

Do not allow the charging contacts or the battery to come into contact with metal objects.

Do not open it as you could be exposed to high voltages.

Do not allow the charger to come into contact with liquids.

Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion.

Always use the cables provided with the product.

Handsfree activation could suddenly increase the volume in the earpiece to a very high level: make sure the handset is not too close to your ear.

This equipment is not designed to make emergency calls when the power fails. An alternative has to be made available to allow emergency calls.

Do not expose the phone to excessive heat caused by heating equipment or direct sunlight.

Do not drop your phone or allow objects to fall on your phone.

Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives as these may harm the set.

Do not use the product in places where there are explosive hazards.

Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

Active mobile phones in the vicinity may cause

interference.

About operating and storage temperatures:

Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).

Store in a place where temperature is always between -20 and 45º C (-4 to 113º F).

Battery life may be shortened in low temperature conditions.

2.2 Conformity

We, Philips declare that the product is in compliance with the essential requirements and

Important

5

Page 7
Image 7
Philips SE 745 manual Important in rural areas Electrician, as appropriate, Power requirements, Conformity