Philips SE 745 Set Auto Prefix, Last stored detect string is displayed if any, Country Selection

will return to its default settings. However, your phonebook as well as the unread messages of your answering machine will remain unchanged after reset.

Note

You may have to configure your phone once again. In this case the WELCOME mode will appear again after master reset. (go to chapter 3.3)

1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Reset and press mSELECT.

2Scroll :to Yes and press mSELECT. A validation tone is emitted.

• The unit is reset to its default settings (see “Default settings” on page 34).

8.11Set Auto Prefix

This feature allows you to define a prefix number to be added to the beginning of a number during predialling (see “Predialling” on page 16). You can also use this feature to add a detect string to match and replace the first few digits of the number during predialling.

You can enter up to a maximum of 5 digits for the detect string and 10 digits for the auto prefix number.

Note

The use of your SE745 cannot be guaranteed with all types of PABX.

1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Auto Prefix and press mSELECT.

2Detect digit is displayed on the screen. Press mSELECT to enter.

• The last stored detect string is displayed (if any).

3Enter a detect string number (maximum 5 digits) and press mOK to confirm.

• Prefix number is displayed on the screen.

4Press mSELECT to enter.

• The last stored prefix number is displayed (if any).

5Enter the prefix number (maximum 10 digits) and press mOK to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Note

If no detect string (blank) is entered, the prefix number will be automatically added to the predial number after rkey is pressed.

For numbers starting with *, # or a pause (P), the prefix number will not be added to the predial number after rkey is pressed.

8.12 Country Selection

The availability of this menu is dependent on your country.

You can select another country different from the one chosen during WELCOME mode.

Note

Once the country is selected, the default line settings for the selected country will be applied to the phone automatically (e.g. Recall time, Dial mode, Language, etc).

1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Country and press mSELECT.

2Scroll :to the country of your choice and press mSELECT.

3Press mSELECT again to confirm.

• A validation tone is emitted and the screen returns to previous menu.

8.13Activate/Deactivate Conference mode

When conference mode is activated, you can initiate a three-party conference call with a second handset registered to your base station automatically if the second handset takes the line when there is already an external call in progress. The default setting for this mode is Off.

1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll :to Conference and press mSELECT.

2Scroll :to On or Off and press mSELECT to confirm.

• A validation tone is emitted and the screen returns to previous menu.

Advanced settings 33