6.11 Paging
The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.
1Press pkey on the base station.
• All the registered handsets start to ring.
2Once retrieved, press any key on the handset to end the paging.
Note
If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.
Tip
To stop paging, press pkey on the base station again.
6.12 Clock and Alarm settings
This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01/01/07 and 00:00 respectively.
6.12.1Set Date and Time
1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, press mSELECT again to enter Set Date/Time.
2Enter the current time (HH:MM) and current date (DD/MM/YY) and press mOK.
• A validation tone is emitted.
Note
Enter the date in Day/Month/Year format and the time in
An error tone will be emitted if an invalid digit is entered in the date/time fields.
Hour: 00 to 23; Minute: 00 to 59
Month: 01 to 12; Date: 01 to 31 (except for February)
Warning
If your phone is connected to an ISDN line through an adaptor, the date & time may be updated after each call. The availability of date & time update is dependent on your network provider. Please check the date & time settings in your ISDN system or contact your network provider.
6.12.2Set Alarm
1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, scroll :to Alarm and press mSELECT.
2Scroll :to Off, On Once or On Daily and press mSELECT.
3If you select On Once or On Daily, enter the
time (HH:MM) for the alarm and press mOK.
• A validation tone is emitted.
Note
The alarm tone and alarm icon 
will only sound/blink for 1 minute when the alarm time is reached. To mute the alarm tone, simply press any key on the handset.
6.12.3Set Alarm Tone
1Press m MENU in idle mode, scroll :to Clock & Alarm and press mSELECT, scroll :to Alarm Tone and press mSELECT.
2Scroll :to Melody 1, Melody 2 or Melody 3 to play the melody.
3Press mSELECT to set the alarm tone.
• A validation tone is emitted.
6.12.4Do not Disturb mode
This feature is available only if you have subscribed to Caller Line Identification (CLI) service from your network provider. When Do not Disturb mode is activated, the phone will ring only when there are calls received from authorised groups. For all other callers, the phone will display an incoming call message or the backlight will be turned on, but it will not ring. If the telephone answering machine is activated, it will answer the call to allow the caller to leave a message.
Note
By default, Do not Disturb mode is Off.
Use more of your phone | 25 |
