You can now use your Parrot PARTY with your Bluetooth audio player. To play your music files from your audio player,

refer to the chapter entitled «Streaming Audio Function» in this guide.

NB: ensure that the default code for your audio player is «0000». For further information, refer to your audio player’s user guide. You can also modify the default PIN code of the Parrot PARTY using the Parrot Audio Configuration Tool software. For further information, refer to the software’s user guide.

Using several Bluetooth audio players

The Parrot PARTY can be paired to 10 audio players. However, if an audio player is already streaming music, the other devices will not be able to play their music through the Parrot PARTY at the same time. To do so, you must stop the player currently streaming.

NB: some audio players prevent other devices from being connected to the Parrot PARTY at the same time, even if music is not currently being streamed. You must first disconnect the device from the Parrot PARTY, so that you can use another audio player

Using an audio player with a Jack audio cable

You can connect your audio player to the Parrot PARTY via a jack / Jack audio cable to stream music through.

Make sure to check that the connectors are inserted properly to avoid any disruption.

NB: When the Parrot PARTY is connected by means of a jack audio cable to an audio player, you can also play your tracks by Bluetooth from another audio player. Streaming by Bluetooth will take priority over the line-in connection.

Stand by mode

To save battery life, the Parrot PARTY switches to power saver mode (the LEDs switch off) if no Bluetooth connection is detected for two minutes or if there is no streaming for 5 minutes.

To exit the power saver mode, start a connection from your audio player or press any button.

NB: The Parrot PARTY cannot switch to power saver mode if it is connected to the Parrot Audio Configuration Tool. Remember to disconnect by clicking on the Bluetooth icon.

Audio streaming function

Bluetooth audio streaming connection

Before you start streaming music from your audio player to the Parrot PARTY, both devices must be connected to each other.

Once they have been connected, simply start playing the track on your audio player and the sound will come through the Parrot PARTY.

You can establish a connection between the two devices via

the Bluetooth menu on your audio player, or you will be prompted to select the Parrot PARTY once you have started playing a track. To use the latest procedures for connecting your audio player

to the Parrot PARTY, refer to the Support section on our website at www.parrot.com.

English

15

Page 15
Image 15
Parrot PF520130AA user manual Audio streaming function, Using several Bluetooth audio players, Stand by mode