8.4.2To modify Call Barring number
1Press mMENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll :to Call Barring and press mSELECT.
2Enter the Master PIN when prompted and press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Scroll :to Barring Nr. and press mSELECT.
4Scroll :to Number 1, Number 2, Number 3 or Number 4 and press mSELECT.
5Enter the barring number (maximum 4 digits) and press mOK to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
Note
If a restricted number is dialled, the call will not be connected. When this happens, the phone emits an error tone and returns to idle mode.
8.5 Baby Call
When activated, the Baby Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services.
You can enter up to 24 digits for baby call number.
8.5.1To activate Baby Call mode
1Press m MENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT.
2Enter the Master PIN when prompted and press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Press mSELECT to enter Mode.
4Scroll :to On and press mSELECT to confirm.
5Enter the Baby Call number and press mOK to confirm.
• A validation tone is emitted.
8.5.2To deactivate Baby Call mode
1Long press mMENU (when Baby Call mode has been activated before).
2Enter the Master PIN when prompted and press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Scroll :to Off and press mSELECT to confirm.
8.5.3To change Baby Call number
1Press m MENU in idle mode, scroll :to Advanced Set and press mSELECT, scroll : to Baby call and press mSELECT.
2Enter the Master PIN when prompted and
press mOK to confirm.
Note
By default, the Master PIN is 0000.
3Scroll :to Number and press mSELECT.
•The last stored Baby Call number is displayed (if any).
4Enter the baby call number (maximum 24 digits) and press mOK to confirm.
•A validation tone is emitted and the screen returns to previous menu.
8.6Registration
The procedures described below are the procedures that you will find in your handset. The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 6 handsets can be registered to one base station. The Master PIN is required before you can register or unregister handsets.
Note
By default, the Master PIN is 0000.
1On the base station, press and hold C for approximately 3 seconds.
• A validation tone is emitted.
2On the handset, press mMENU, scroll : to Advanced Set and press mSELECT,
Advanced settings | 31 |
