12. Programming
Before leaving our factory, the machine is adjusted to enable you to obtain coffee without any additional programming. In order to adapt the result to your personal taste, various settings can be pro- grammed individually. The programming keys are located behind the front cover (3).
The following settings can be programmed:
Powder quantity
Brewing temperature
Water quantity
Filter
Water hardness
Economy mode
Timer clock
Automatic switch on time
Automatic switch off time
Supplies and cup counter
Language selection
12.1 Programming POWDER QUANTITY
Switch the machine on by pressing ON/OFF key 
.
Press key P until you can hear an acoustic signal.
POWDER QUANTITY / SELECT KEY
Now press the key that you want to programme. Use the key for 1 cup only. The corresponding quantity for 2 cups is adjusted automatically by the machine after programming is finished.
POWDER
–··········II··········+
The powder quantity can be selected by pressing keys + or - briefly.
To store the new powder quantity in memory briefly press key P .
POWDER QUANTITY / SELECT KEY.
You can go to the next setting by pressing key + .
12.2 Programming coffee temperature
TEMPERATURE COFFEE / SELECT KEY
Now press the key that you want to programme.
Select the required temperature (high or normal) by activating key + or
To store the new coffee temperature in memory briefly press key P .
TEMPERATURE COFFEE / SELECT KEY
You can call up the next setting by pressing key + .
12.3 Programming water quantity
WATER QUANTITY / SELECT KEY
Put a cup under the
The selected value is confirmed
Now your machine prepares a coffee.
ENOUGH COFFEE / PRESS KEY P
OK? P – ··········II··········+ |
When the required water quantity is reached press key P . You can call up the next setting by pressing key + .
There is an additional possibility to alter the water quantity
anew. Press key + or - for this purpose.
If you wish to draw another coffee to control the water quantity, press key again otherwise press key P briefly to store water quantity in memory.
You can call up the next setting by pressing key + .
12
