Alliance Laundry Systems FLW1525C CAUTION

Operation

17

802951 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Step 3: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing,

high efficiency (HE) detergent (1), bleach (2) and

fabric softener (3) to the dispenser drawer (refer to

Figure 17). Close dispenser drawer.

IMPORTANT: If using non-HE detergent, avoid

oversudsing by using 1/2 of the detergent

manufacturer’s recommended amount.

Figure 17

Step 4: Set Fabric Selector

Push touchpad for NORMAL, PERM PRESS or

DELICATES/BULKY cycle. Light indicates

selection.

NOTE: Changes can be made to Fabric Selector

setting up until the first fill is complete.

Figure 18

Step 5: Set Wash Temperature

Push touchpad for HOT, WARM or COLD. Light

indicates selection.

NOTE: Always follow manufacturer’s care labels.

Figure 19

FLW2236N

1Detergent

2Bleach

3Fabric Softener

FLW2236N

1

3

2

685942

Dispenser drawer requires a special tool

for removal. Contact a service person if

removal is necessary. W236

CAUTION

FLW2228N

FLW2229N

Contents

Main Installation/Operation Frontload Washers Metered Commercial Page Page Table of Contents Safety Information Explanation of Safety Messages Important Safety Instructions DANGER CAUTION Page 802951 Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT Installation Dimensions and Specifications MODELS WITH GRAVITY DRAIN MODELS EQUIPPED WITH DRAIN HOSE 11.5 in. (3.81 cm) Inside Diameter 1.86 in. (4.72 cm) Outside Diameter Before You Start Tool s Installing the Washer Step 1: Position Washer Near Installation Area +,($ Step 2: Position and Level the Washer Step 3: Connect Fill Hoses Water Suppl y Connecting Hoses Risers Step 4: (Non-Gravity Drain Models Only) Connect Drain Hose to Drain Receptacle Standpipe Installation Step 5: (Gravity Drain Models Only) Connect Drain Outlet to Drain System Step 6: Remove the Shock Sleeves and Shipping Brace Step 7: Wipe Out Inside of Wash Drum Step 8: (Supply Injection Models Only) Connect External Supplies to Washer Control Function Test CHEMICAL INJECTION ELECTRICAL INTERFACE Step 9: Plug In the Washer Electrical Requirements Grounding Instructions Step 10: Check Installation Operation Operation Instructions Step 1: Load Laundry Step 2: Close Loading Door Step 3: Add Laundry Supplies CAUTION Step 4: Set Fabric Selector Step 5: Set Wash Temperature Page Indicator Lights Maintenance User-Maintenance Instructions Lubrication Cold Weather Care Care of Your Washer Reinstallation of Shipping Materials Cleaning Foreign Object Trap Troubleshooting Washer Symptom Possible Cause/Solution Contact Information WARN ING Page Installer Checklist Fast Track for Installing the Washer (Refer to the manual for more detailed information)