3

Cautions on the monitor:

• The monitor built in this unit has been produced with
high precision, but it may have some ineffective dots.
This is inevitable and is not considered defective.
• Do not expose the monitor to direct sunlight.
• Do not operate the touch panel using a ball-point
pen or similar tool with the sharp tip.
Touch the buttons on the touch panel with your
finger directly (if you are wearing a glove, take it off).
• When the temperature is very cold or very hot...
Chemical changes occur inside, causing malfunction.
– Pictures may not appear clearly or may move
slowly. Pictures may not be synchronized with
the sound or picture quality may decline in such
environments.

For safety...

• Do not raise the volume level too much, as this will
make driving dangerous by blocking outside sounds,
and may cause hearing loss.
• Stop the car before performing any complicated
operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.
How to read this manual:
• This manual mainly explains operations using the buttons on the monitor panel and touch panel. For
operations using the remote controller (RM-RK252 ) , page 53.
• < > indicates the variable screens/menus/operations/settings that appear on the touch panel.
• [ ] indicates the buttons on the touch panel.
Indication language: English indications are used for the purpose of explanation. You can select the
indication language from the <Settings> menu. ( page 42)
How to reset your unit
Your preset adjustments will also be erased (except the
registered Bluetooth devices).
How to forcibly eject a disc
On the monitor panel and the source control screen:
(Hold)
(Hold)
Be careful not to drop the disc when it ejects.
If this does not work, reset your unit. ( above)
Car audio and car goods internet store Winauto
winauto.ua