Fujitsu SRS-9924 manual This feature enables and disables the speakerphone function

ENABLING AND DISABLING THE SPEAKER FUNCTION

4.You can then select a different menu function, or press OPTIONS to return to the normal display.

This feature enables and disables the speakerphone function.

1. OPTIONS 5 ENTER

SPEAKER SERVICE MODE

SUPPORTED

3

HANDSFREE, HANDSET, AND HEADSET MODES

Headset Mode

Handset Mode

Handsfree

Supported

2.ENTER

1:SUPPORT2: NO SUPPORT (SELECT 1-2)

3.Press 1 or 2 to select your choice.

4.Press ENTER. This screen appears:

SUPPORTED or NO SUPPORT

COMPLETED

You can set up the Digital Set to use the handset, the speaker, or a headset by selecting from the following modes:

Enables use as a headset-only phone. You must disconnect the handset from the jack on the phone’s left side and plug the headset into the same jack. Calls are connected and disconnected only by your pressing the SPKR button. In headset mode, the handsfree mode, including the speaker/ microphone, is not supported.

Enables normal use as a handset phone. While in this mode, the speaker can be enabled or disabled as follows:

Allows speaker use, controlled by SPKR button.

Using the NI / 5E Custom Terminal Set-Up

3-13