Fujitsu SRS-9924 manual 5E Custom Terminal Overview

1

NI /

5E Custom Terminal Overview

Unique Components

Switches and

Connectors

LED Indicators

Softkeys/MENU. Four buttons below the display with changeable functions. The MENU key displays the current functions on line 2 of the display.

Multifunction buttons. These buttons are assigned to CAs, DNs, one-touch numbers, or network features. Dual assignments are not supported. (For example: One-Touch and Call Appearance)

Function keys. Single-touch keys for features, consisting of DROP, CONF, TRAN, REDIAL, HOLD, and SPKR.

Volume/Contrast buttons. Increase or decrease display contrast (when no call is active), or speaker volume (when a call is active).

Terminating resistor. This built-in resistor, labeled “TR”, provides a standard termination to the ISDN line. The factory setting is OFF.

DC power connector. This connector, labeled “48 V DC”, provides an alternative to power delivered through the ISDN line.

Power source selection. This switch may be used in multiple terminal installations. ON = AC adapter only; OFF = Power source 2 or AC adapter

ISDN line connector. Use this RJ-49 connector to plug in the telephone line. Normally, the connector also provides DC power for the set.

Handset/Headset connector. This jack, located on the bottom of the set, allows you to connect either a handset or a headset.

Message Waiting (labeled MSG)

Feature Activator 63 is utilized for Message Waiting.

The LED associated with each button may light when a feature is activated. (Feature dependent)

1-6