Fujitsu SRS-9924 manual To Make a Call

SRS-9912-SP and SRS-9924

QUICK REFERENCE CARD

To Make a Call

1.Press idle CA (Call Appearance) and pick up the handset. (For handsfree mode, press SPEAKER.)

2.Dial the number.

To Place One-Touch Calls

Press a one-touch button. (If no idle CA LED lights, press any idle CA.)

To Answer a Call

1.Press the green-flashing CA.

2.Pick up the handset. (For handsfree mode, press SPEAKER.)

To Put a Call on HOLD

1.Press HOLD.

2.To get a dial tone, press an idle CA; to connect with another call press a lit or blinking CA.

3.To reconnect with call on hold, press its CA.

To Set Up a CONFERENCE Call

1.While on an active call, press CONFERENCE.

2.Another CA/DN will be selected automatically and you will hear the dial tone.

3.Dial the third party.

OR

4.Press any CA/DN that is ringing or on HOLD.

5.Press CONFERENCE.

Repeat steps 1-3 to add more calls. To disconnect last call added, press DROP. Other participants can drop out by hanging up. At some installations if you drop out, the entire conference is disconnected. Ask your Systems Administrator.

To Use Call Pickup

1.Get a dial tone.

2.Press CALL PICKUP feature button.

To Review Unanswered Call List (UNA)

1.When a •UNA appears on the displays, press UNA (softkey 1). Information from the oldest unanswered call appears.

2.Press UNA again. Information from the next-to-oldest unanswered call appears. After displaying most recent call, display returns to the oldest call.

3.To delete displayed call information, press # on the keypad, then CLEAR (softkey 3).

To Use Personal Directory

1.Press L-DIR.

2.Scroll to the name and number you want to call, using the * key to scroll up and the # to scroll down. The > should be next to the Name you want to call.

You may also dial the two-digit code (e.g. 02) associated with the name or number.

3.Lift the handset or press the speaker button.

To Switch To/From Handsfree

To switch to handsfree, press SPEAKER and replace handset in cradle. (The MIC-OFF button must be turned off to talk; if its LED is lit, press it once to turn it off.)

To switch to handset, pick up handset.

To Change Call Volume

With a CA active (LED on), pressrepeatedly to increase volume, pressrepeatedly to decrease volume. Volume is held until reset.

To Adjust Display (When No Call is Active)

Press repeatedly to increase contrast.

Press repeatedly to decrease contrast.

To Use MIC-OFF

To mute handset or the handsfree microphone, press MIC-OFF (LED lights). Press again to turn microphone on (LED goes dark).

To Program a One-Touch Button

1.Press OPTIONS (softkey 4), 1 on the keypad, then ENTER (softkey 1).

2.Press the button you want to make a one-touch. (Do not reuse CA FA keys. Or press an existing one-touch button to change its recorded number.)

3.Dial the numbers you want that button to send.*

4.Press ENTER. (COMPLETED appears on display.)

5.To exit, press OPTIONS.

*Use the HOLD button to insert pauses.