Fujitsu SRS-9924 manual Isdn Redial

5E Custom	These assignments are not used for 5E Custom
ONLY	ISDN.
REDIAL	If there are no idle CA’s available, pressing REDIAL
Dials the last	brings the number to the screen but does not dial.
number dialed	When an idle CA later becomes available, pressing
on this phone	the CA button dials the number.
HOLD	1.	To use hold, press HOLD while you have an
Retains		active call in progress.	The CA LED changes
connection with		from steady red to flashing red.
an existing call
until you can	2.	To reconnect with a call on hold, press its
return to it		flashing CA button.	Its LED changes from
		flashing red to steady red, and you are
		reconnected.
	The autohold feature automatically puts an active
	call on hold whenever you press another CA.
CONFERENCE	Conference is a network-based feature that you
	must subscribe to from your telephone company.
Telephone
conferences	The number of conference call participants allowed
with multiple	depends on the number specified when you
participants	subscribe to the feature. Ask your System
	Administrator how many participants are allowed.
Setting Up a	After establishing the initial call, add participants
Conference Call	to the conference call by following these steps:
	1.	Press CONF.
		The CONF button lights up. The initial call is
		placed on hold, and the next available CA is
		selected.

2. Dial the number of the person you want to add to the conference.

or

Select any CA that is ringing or on hold.

2

Using the Terminal

2-7